Disklavier

I have an MX100 II and used to use the MIDI data record mode by 
holding Disk Metronome and Func/Edit buttons at power up.  
I upgraded the unit to an MarkIIXG and now cannot get into MDR Mode.
Any bobdy have any experience with this?

Thanks,
Peter

If you upgraded by buying a DSR-1 then remember to set the keyboard out to 
on everytime you power-up the piano.

If you bought a new MarkII XG model, the answer is in the Advanced Operation 
Manual on page 13.  Press the Record Button. Press either the cursor (->) 
button or the Voice button.  Use the Dial or the +/yes button until the 
display reads MDR MODE REC., etc.

Hope this helps.

Carol Beigel


>From: "Peter Braun" <braunp@...>
>Reply-To: disklavier@yahoogroups.com
>To: disklavier@yahoogroups.com
>Subject: [disklavier] MIDI Data Record mode
>Date: Thu, 31 May 2001 04:05:53 -0000
>
>I have an MX100 II and used to use the MIDI data record mode by
>holding Disk Metronome and Func/Edit buttons at power up.
>I upgraded the unit to an MarkIIXG and now cannot get into MDR Mode.
>Any bobdy have any experience with this?
>
>Thanks,
>Peter
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com