Dotcomformat

I thought that some of you might like to see the MOTM panel I made
using the Blacet to MOTM adapter panel.  (Pictures are in the Larry T
folder in the photo section.)  I mounted the CGS Psycho LFO that I got
from Liquidcolor on eBay and the Blacet MircoLFO kit that I just
assembled into the panel.  I used the switched connections on the 1/8"
and 1/4" jacks so that the MircoLFO will run from the internal Rate
knob, or the 1/4" jack, or finally the 1/8" jack.  I used the same
setup for the Wave Mod CV jacks.  This way if I get a burning desire
to use 1/8" plugs/cables, I can override the 1/4" connections without
unplugging the 1/4" cables.  The outputs are all setup as multis so
that both 1/4" and 1/8" jacks are active.  I also replaced the dip
switch on the MicroLFO with the switch on the panel to control the
High/Low rate range setting.    I used a Casio LabelIt system to do
the labels.  I'll replace them with White print on clear label stock
when I get finally get the label stock.

Larry T.