Yahoo Groups archive
Messages
Page 1 of 27 · 1314 messages matched
2019-10-12 by Drummer@ImJohn.com
Hi all, I’ve never tried one and it’s long out of production but the Modcan CV Recorder 57B comes to mind: http://www.modcan.com/bmodules/cvrecorder.html John L Rice From: dotcomformat@yahoogroups.com Sent: Friday, October 11, 2019 4:32 PM To: dotcomformat@yahoogroups.com Subject
2019-10-12 by Mike Kelley
Agreed, it was a shot in the air idea. If the original source to the composition was say noise or audio within the patch . You could with a line recorder reproduce the randomocity produced by a noise module. I understand that’s in a different direction than what you were asking,
2019-10-12 by Bill Yerazunis
It's trivial to make a module that's the recorder / player of analog voltages if you allow digital technologies. Doing it _in_ analog is much more difficult. - Bill On Saturday, October 12, 2019, 12:36:01 AM UTC, Mike Kelley mikelleys@yahoo.com [dotcomformat] wrote: Interesting c
2019-10-12 by Mike Kelley
Interesting concept, an analog voltage, recording device - right? all of these connections are analog electrical audio, each their respective type, you might consider a 8trk reel to reel or larger if needed If the reel deck was patched in at the right points, it might work Wild i
2019-10-11 by William Beith
Good evening gentlemen, With all your experience, this is the perfect place to ask my question. Are you aware of a devic with memory that can record and store the voltage output of a sequencer and the gate/trigger pulses associated with it? I set up some interesting patches and w
2019-10-11 by Mike Kelley
Amen to that No Facebook in my house Sent from my iPhone > On Oct 11, 2019, at 2:59 PM, 'VinceL' legravin@gmail.com [dotcomformat] wrote: > > > Yeah, some of us dinosaurs are still here. > > I refuse to use Farcebook > > From: mailto:dotcomformat@yahoogroups.com > Sent: Friday,
2019-10-11 by VinceL
Hi Morb! I normally get my internet fix about modular synths on Muffwiggler. Roger did join Muffwiggler a few years ago and was fairly active at first. I haven’t seen a post from him there in a long, long time. I guess facebook keeps him busy. Staying on topic for this list...the
2019-10-11 by morbius
Yeah Vince... I'm still here, too... monitoring... but there just doesn't seem to be any activity on the yahoo group. I also monitor the Facebook group (despite my better judgement)(I blame excessive sobriety on my part)... but it (the group) lacks cohesion (among other things) I
2019-10-11 by VinceL
Yeah, some of us dinosaurs are still here. I refuse to use Farcebook From: mailto:dotcomformat@yahoogroups.com Sent: Friday, October 11, 2019 1:52 PM To: dotcomformat@yahoogroups.com Subject: [dotcomformat] Is there anybody out there? Wow, Facebook sure killed this place. First n
2019-10-11 by 79flh@peoplepc.com
Wow, Facebook sure killed this place. First new post since 2015! I still have my DotCom. And it still works.
2015-02-18 by ilpo.numminen@gmail.com
Couple of modules for sale. 10 modules AND one power. Prices -10% from dotcom webpage prices (oscillator are -25% because they do not have the crs) Oscillators x3 Env generators x3 (one is modded with time range switch) Noise Multiple Vca Old midi interface module 140$ And qps1 p
2014-06-09 by John L Rice
Thanks for the kind words, Harold! J John From: wny_synth@yahoo.com [dotcomformat] [mailto:dotcomformat@yahoogroups.com] Sent: Sunday, June 8, 2014 7:25 PM To: dotcomformat@yahoogroups.com Subject: RE: [dotcomformat] Re: Fwd: Modcan / Cyndustries Module Sale! John Thanks for the
2014-06-09 by wny_synth@yahoo.com
John Thanks for the info. By the way, I am a big fan of your videos. I have learned quite a bit from them. Harold
2014-06-06 by John L Rice
Hi Harold, I used to have one but it was one of the things I sold somewhat recently to try to stay afloat financially. L Here is a demo I did of it: https://www.youtube.com/watch?v=kAlMt42g8U8 I think the “through zero” FM is the main thing is does but it does a whole lot more. I
2014-06-06 by wny_synth@yahoo.com
John That is certainly one metric of the cost of the unit. I am wondering what sets this module apart, why would I spend this much for a VCO, what can it do that a standard VCO can't. Do you own any of Zeroscillators? Thanks Harold
2014-06-06 by John L Rice
I’m not saying this justifies it but if you compare the two, at least with the original ZO, there are probably almost 4 times the parts in the ZO compared to the Q106. Both are excellent VCOs IMHO but quite different beasts. John L Rice https://www.youtube.com/JohnLRice From: wny
2014-06-06 by mikelleys@yahoo.com
1-Exponential FM 2-Linear Through-Zero FM 3-Linear FM Dynamic Depth Modulation 4-Bi-Phasic Waveform Morphing 5-Pulse Width Modulation 6-Variable Sync (from none to hard synch) 7-Time Reversal & a 4 quadrant multiplier "This ain't your daddy's oscillator!"
2014-06-05 by wny_synth@yahoo.com
Cynthia, Can you explain why a Zeroscillator is insanely expensive. I can by 4 dotcom VCOs for the price of 1 Zeroscillator. What justifies the cost?
2014-06-04 by dana@danacountryman.com
Dana's dual LFO mod for s.com is in the works! Stay tuned right here.... I'm toiling. -dc
2014-06-01 by Cyndi Mail
Howdy! New Modules Now Shipping! OCTAL VCAs in Dotcom, Modcan, and Motm formats! http://www.cyndustries.com/modules_octal_vca.cfm?type=89 ZEROSCILLATORS Taking Orders in Dotcom, Modcan, and Motm which will ship June 10th (Makes a Great Graduation Gift!) http://www.cyndustries.com
2014-04-29 by Kevin Doheny
Outside my price range. Still, cool that they did it: http://www.engadget.com/2014/04/27/emerson-moog-modular-system-synthesizer-remake/?a_dgi=aolshare_facebook I'm not going to hold my breath that an ARP 2500 will ever be recreated, though. ---Kevin
2013-12-13 by dana@danacountryman.com
I post this out-of-print Christmas album every year for my cool synth friends, and here it is again! All done on ARP synths -- not dotcom, sorry! Hope you enjoy... - Dana http://www.danacountryman.com/nutcracker/nutcracker.html
2013-09-25 by Kevin Doheny
Got this from over on the manual_exchange group. Someone's started a Yahoo group and change.org petition for Yahoo to change back to the old group format (before they put in this neo change): http://www.change.org/petitions/yahoo-groups-i-want-the-old-yahoo-groups-back?share_id=b
2013-09-25 by Irfon-Kim Ahmad
Hi, everyone! Audio Damage ( http://www.audiodamage.com ) just announced that they're moving from the software plug-in realm to hardware with a line of modules. However, at this time, they're only releasing them in Eurorack format. They said that if they get about 50 interested c
2013-09-18 by dustin drase
Heya everyone- Excited to be on board this list! Has anyone heard anyt inside information from the Voltergeist camp about the new 5U Makenoise modules? As of early august they said pre-orders would be up soon. http://voltergeist.org/?p=75 Dustin On Tue, Sep 17, 2013 at 11:14 PM,
2013-09-14 by William Beith
Sent from my iPhone Attending Knobcon. Lots of Dotcom everywhere. Bill
2013-09-12 by ~Morbius~
I've got a Q119, in good condition for sale. I also have other modules I can let go (ask about what you're interested in). Everything less than the usual 80% of new price. Please use forward instead of reply. Thanx. ♪ ~ morby's mobile ~ ♪
2013-08-23 by sasquatch98930@yahoo.com
Thanks, tomorrow I will post the 95 new mandatory rules for participation in this forum. Wait . . . on second thought . . . as you were. David >________________________________ > From: John L Rice >To: dotcomformat@yahoogroups.com >Sent: Thursday, August 22, 2013 4:43 PM >Subject
2013-08-22 by John L Rice
Congrats David and welcome! > -----Original Message----- > From: Happymoogman [mailto:dana@danacountryman.com] > Sent: Thursday, August 22, 2013 3:50 PM > To: dotcomformat@yahoogroups.com > Subject: [dotcomformat] Special Moderator Notice! > > Hi synth-friends, > > Dana Countryma
2013-08-22 by Happymoogman
Hi synth-friends, Dana Countryman, here. Morbius has stepped down as moderator, and he has asked me to take over, watching over this newsgroup. However, because of the massive musical projects that I currently am involved in, I am unable to fulfill the moderator duties. The good
2013-08-13 by VinceL
The variety of modules available in MU continues to expand. MakeNoise is a company in Asheville, NC (near Moog Music) who make a variety of modules in Eurorack ( www.makenoisemusic.com ). Check out the unique capabilities of these modules on the MakeNoise website. The guys at Vol
2013-08-11 by VinceL
For those of you with a need for a master clock module in your system, Paul at Krisp1 is considering offering the Pamela’s Workout Euro module as an MU module. If you are unfamiliar with this module, check out the webpage for it: http://busycircuits.com/alm001/ Paul at Krisp1 (UR
2013-07-30 by henfieldj
Hi, I have downsized my Dotcom format system down to a suitcase, so I have the following module available for sale: A Synthesizers.com Q109 ADSR Envelope Generator that has been modified for shorter times. I have also installed a Megaohm Audio VCA Rider kit in this Q109, so it no
2013-07-20 by sasquatch98930@yahoo.com
Hi, John, Yes I remember seeing your PM Resonator at one of the Synthfests in Seattle. It was nice. >________________________________ > From: John L Rice >To: dotcomformat@yahoogroups.com >Sent: Friday, July 19, 2013 8:06 PM >Subject: RE: [dotcomformat] Grove Audio > > > > >Hi Da
2013-07-20 by sasquatch98930@yahoo.com
Thanks, Terje, I guess there is hope. I've been waiting three years for the GMS-742 MIDI converter. I don't mind waiting until it's ready. It's the endless promises and missed deadlines which are frustrating. >________________________________ > From: Terje Winther >To: dotcomform
2013-07-20 by Terje Winther
Hi David, Yes, I ordered one of the joystick modules earlier this year, and got delivery about a month ago. It took some time, and response on mail was a bit slow, but friendly. He did tell me when I ordered that it was going to take some time. Very good module, btw. Has anyone b
2013-07-20 by John L Rice
Hi David, I did actually get one of the PM Resonators in MU format several years ago. It is very nice, both in sound quality and build quality. That said, it did take some back and forth to get it ordered since at that time, (and to this day?), his web site ordering wasn't workin
2013-07-20 by Doug
--- In dotcomformat@yahoogroups.com, "David" wrote: > > Has anyone bought anything from Grove Audio? I've been getting the runaround for three years now. The few times he does respond to my emails he always as some excuse and says it will be ready to ship in about two weeks. > >
2013-07-20 by David
Has anyone bought anything from Grove Audio? I've been getting the runaround for three years now. The few times he does respond to my emails he always as some excuse and says it will be ready to ship in about two weeks. David W. Skinner
2013-06-18 by Ritchie DeCarlo
wer http://etuition.mu/gd/avq/dduqzjcge/oqozxidpsxe.php Ritchie DeCarlo
2013-05-07 by Mark Rivera
http://lumin.us/msr/forums/box11/index.html Some quick notes and photos about the Box11 I received today. Short(er) version: I like it. Attention to detail is good. Finish is tops. Build is sturdy. Mark
2013-02-16 by Brian Whittington
http://natmor-secure.co.uk/zklqce/568e2u
2012-10-26 by James Gallant
http://aquaprice.by/equipmentbetween/46waynemiller/
2012-10-24 by Happymoogman
Hi guys, This thread reminds me of the "Halloween" tune that I wrote and recorded for my "Moog-Tastic!" CD. Thought I'd share that track. Lots of Dotcom on this.... http://www.danacountryman.com/Moog-Tastic/full_mp3s/11_Moog_Manor.mp3 - Dana -- http://www.danacountryman.com/moogt
2012-10-24 by ~Morbius~
Yeah... I’ve done this several times in past years... along with smoke/fog generators... lighting... ‘flying/floating ghosts’ (on wires ‘n such), and more. Usually, I’d set-up 5 or 6 ‘spooky’ synth sounds... from Theremin-like delayed vibrato (a la Outer Limits), to ‘the sounds o
2012-10-24 by dougslocum@gmail.com
Was there supposed to be an audio link? Didn't see one. Now I'm going to have to play Streisand backwards. Sound really scary. Sent from my Verizon Wireless 4GLTE smartphone
2012-10-24 by Will Blouin
When I was a kid, a guy in my neighborhood used to play Barbara Streisand albums backwards through a speaker hidden in a jack-o-lantern. On Tue, Oct 23, 2012 at 8:25 PM, Bill Yerazunis yerazunis@yahoo.com > wrote: I did this last year; I just played the knobs and had a great time
2012-10-24 by Bill Yerazunis
I did this last year; I just played the knobs and had a great time handing out candy. A reasonably-full P22 cab is perfectly adequate for this sort of work. :-) See: http://yerazunis.dreamwidth.org/2526.html for more information. - Bill --- On Tue, 10/23/12, Irfon-Kim Ahmad wrote
2012-10-23 by Irfon-Kim Ahmad
I'm considering setting up the modular to produce spooky sounds at the house this Hallowe'en. I'm at work right now and can't experiment, but I'm wondering if those of you who have done this have a favourite "spooky sounds" patch. It seemed like it might be thematic to share them
2012-09-24 by cobey_0
Hi all, I'd like to share a modification to make the Q106's pulse output a bit smoother. I realize that this is purely a matter of preference, so check out the mp3 clip (see below) of the original and modified pulse waves to get an idea of the difference in sound. In the clip I s