Dotcomformat

Kookie, 

I want to be able to sweep through the range but I prefer not to use other modules and 
cables to do it if there are units out there that will do this. As far as liking or disliking 
them, they have their place but as of now I'm looking for something that doesn't have 
them.

How many different ways did I spell "coarse"? I really need to look at what I'm typing.

Signed,
Kookie too






--- In dotcomformat@yahoogroups.com, "~Morbius~" <morbius@...> wrote:
>
> Is it that you do not 'like' octave range switches... or is it that you just want to be able to 
sweep the full range?
> Because, if you just wanna sweep... the Q106's will do it easily... ya just patch any 
control voltage... and if you need more range, amplify that with a signal processor, or 
maybe an Instrument Interface.
> 
> I've never had any problems sweeping from sub-audio (like watching the speaker cone 
slowly moving out, then moving slowly in), to way beyond the human-hearing range...  It 
seems to me that the spectrogram... if I remember correctly, was showing either 
22.5+khz... or it was +24khz. Of course, I couldn't hear it... nor could my speakers 
faithfully reproduce it.
> 
> Now- if ya just hate those pesky range switches... go with something else. Frankly, I've 
only heard of one or two people who didn't want CRS ranging... and at least one of them 
had never used 'em, either.
> 
> Call me kookie.
> 
> 
>   ----- Original Message ----- 
>   From: warpt666 
>   To: dotcomformat@yahoogroups.com 
>   Sent: Tuesday, October 28, 2008 6:01 PM
>   Subject: [dotcomformat] Dotcom Compatible OSC with caorse knob instead of range 
switch?
> 
> 
>   I'd like to get an oscillator (or set) that does NOT have an octave 
>   switch but instead has a knob (coarse tuning) that sweeps through the 
>   entire frequency range, from high to LFO. 
> 
>   The Dotcom oscillators have ocatve (range) switches. 
> 
>   It appears that MOTM's model 300 and 310 osc will do this, is that 
>   correct? Can anyone recommend any other osc that will sweep through 
>   the audio range down to an LFO?
> 
>   Modcan's VCO 01 has an audio/ LFO switch. What is the range of the 
>   coasre tuning knob?
> 
>   Frac rack 
> 
>   Blacet's manual for their VCO says that it (coarse knob) sweeps 
>   through the entire range. Should I consider this a possibility if I 
>   use a couple of these...
> 
>   http://synthesizers.com/qmpsa.html
> 
>   ... going into a frac rack?
> 
> 
> 
>    
> 
> 
> -------------------------------------------------------------------
-----------
> 
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG - http://www.avg.com 
>   Version: 8.0.175 / Virus Database: 270.8.4/1752 - Release Date: 10/28/2008 10:04 
AM
>