Dotcomformat

So if I were to use this  (.com to MTOM adapter)...

http://www.synthtech.com/testcart/index.php?
main_page=product_info&products_id=183

... connected it to a .com set up and then use the 3 pin to 4 pin adapter, would I be able to 
use Modcan modules with a .com system? 

Will the Modcan modules drop into the MOTM rack rails without any modifications?

Thanks for for your help :)





--- In dotcomformat@yahoogroups.com, "edgard_varese" <decho3@...> wrote:
>
> Modcan B is totally interchangeable with MOTM as long as you get 4-pin
> to 3-pin power connectors from Modcan.
> 
> David
> 
> 
> --- In dotcomformat@yahoogroups.com, "warpt666" <warped666@> wrote:
> >
> > Hello all...
> > 
> > I'm currently researching my first modular set up. Originally it was 
> > going to be Euro Rack format but after looking around I'm not so 
> > sure. The Dotcom entry system is very appealing as starting point but 
> > I can see myself wanting to branch off
> > 
> > - My first question is, how difficult is it to integrate Modcan (B 
> > Series) modules into a dotcom set up, using the .com power supply? 
> > 
> > - I'm planning on using the rack frames to mount my .com modules into 
> > a rack system. From what I understand the .com rack frame would need 
> > to drilled in order to screw in Modcan B series modules, are MOTM 
> > rack rails directly compatible with Modcan modules or would I have to 
> > drill those as well? 
> > 
> > - I figure incorporating MOTM modules should be as easy as using 
> > their rack rails and one of these:
> > 
> > http://www.synthtech.com/testcart/index.php?
> > main_page=product_info&cPath=67&products_id=183
> > 
> > or some of these :
> > 
> > http://synthesizers.com/qmpsa.html
> > 
> > Is that correct or is there more involved? 
> > 
> > Thnaks for any help with this.
> >
>