Dotcomformat

--- In dotcomformat@yahoogroups.com, John Mahoney <jmahoney@...> wrote:
>
> At 05:54 PM 10/31/2008, edgard_varese wrote:
> >But that's just power supply voltage. 

MOTM = 4 pin .156 MTA (+15,GND,GND,-15)
Modcan = 3 pin .156 MTA (+15, -15, GND)


> Just to be clear: I wouldn't let the level differences stop me from 
> getting cool Modcan modules. 

The level difference can be a problem occasionally. At times I like to
drive my VCF hard and a +/-2.5V signal won't do it. Easily remedied.
If the VCF has two inputs for audio, patch the same signal into both
inputs. That will double the level giving you +/-5V. Don't have two
inputs on your VCF? Use a mixer module to add the signal to itself.
You could also use the Inst. Interface.

  I'd reckon 75% of the time the level difference is of no consequence.

p.