Elektron Musical Instruments

I like it. 
I started thinking about this right yesterday night, as I wanted to record
tracks separately and lost the comp's pumping :)
And voilá, someone has been faster. 
I have a Monomachine and this would work great here either. 
Including the external input connected to the DynamicFx. 

Thanks

Once the algorithm is ready for MD, I do not think it would be difficult to
put it to MnM too. 


Martin





Sent this to Elektron already for consideration but interested to know if
anyone has any comments or additions to the basic idea:

I love the Dynamix section of the FX very much and use it always. 
When I am working on patterns I usually route all tracks through the main
stereo outs. As the compressor is reacting to all the tracks feeding into
the stereo bus - with higher compression settings the overall tonal shifts
start to get very rhythmic - on a sustained kick drum for example - all
other tracks are squashed as long as the kick is present but they lift again
when the kick is absent.

Two things:

1. Because the Dynamix/Compressor is always reacting to its input material -
in a live situation - if I mute a track (the kick drum for
example) I lose that beautiful rhythmic compression effect from the rest of
the mix because the kick is not hitting the compressor input. 
The same goes for any other track you mute or unmute.

2. From a recording/multi-track point of view - I always track everything
separately. I mostly use the separate output for this. In order to separate
the tracks for recording I can only have 1 MD sound routed to the Main outs
to use the Dynamix section for recording. The same problem exists as in my
first example - with the whole mix routed through the Dynamix/Main out the
individual tracks all push and pull against each other in level and tonal
characteristic but as soon as I route individual tracks to the separate
output or mute them so I can record say the Hi Hats separately - I lose the
original sound.

An idea for a future MD OS release:-

1. A new parameter in the Dynamix section - Sidechain/Main Mix Balance

Re-work the software so that the Dynamix FX algorithm has sidechain input.
The balance parameter would then adjust how much the compressor is either
reacting to the Main Mix audio(mutes included) or to the Side Chain input
signal from the individual tracks. The sidechain input only affects the
compressor - the audio does not pass through to the mix outs.

2. A new parameter in every Track - Dynamix Sidechain Send Level

This would set how much level of each MD track gets routed to the Dynamix
Side Chain input. It would need to be a pre-mix volume/pre- mute send so
that the track volume and mutes do not affect the Sidechain signal.
Parameter locks for this might be nice too......

Something also very cool about this would be the ability to use the External
Inputs and then have the source input signal from this MD track feeding the
Dynamix Sidechain inputs - say a Monomachine bassline pushing and pulling on
the compressor for some truly mind bending stuff.......

Cheers all..... DAVID







------------------------ Yahoo! Groups Sponsor --------------------~--> Has
someone you know been affected by illness or disease?
Network for Good is THE place to support health awareness efforts!
http://us.click.yahoo.com/pKxVKC/UOnJAA/n1hLAA/XkLolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links