Elektron Musical Instruments

to add bad to bad - now it's crashing: it seems to freeze the LED's
and LCD, so the button functions appear to work, but no change in any
of the status LED's or display. I can still work the transport, etc.

Hardware test comes out OK, I've done more resets than I can count....

I know elektron is busy with userwave updates (I've sent two support
requests in) so if ANYONE has any idea how to get out of this loop of
glitch and crash, I would love the advice!

Michael

--- In elektron-users@yahoogroups.com, "Michael" <mweeks@e...> wrote:
> Ok, so last night I updated my monomachine to 1.05c (incrementally
too - went from 1.04 
> to 1.05b to 1.05c)
> 
> spent a good amount of time with it last night, put together several
patterns, hooked up a 
> keyboard and did some step entry sequencing (whee!)
> 
> all seemed well, until today when I came home, turned it on, and hit
some buttons only to 
> have some weird screen glitches happen:
> 
> http://endmusik.com/sickmono/IMG_1802.jpg
> http://endmusik.com/sickmono/IMG_1803.jpg
> http://endmusik.com/sickmono/IMG_1804.jpg
> 
> I then did a full factory reset, and re-loaded 1.05b. same problem.
> 
> soft reset, same problem.
> 
> I just reloaded 1.04 and the problem is there too!
> 
> the glitches appear to happen mainly on the bottom left corner, up
through the stop/
> record icon section under the BPM readout. It doesn't appear to
cause any problems with 
> audio, but it's a bit unnerving. Any suggestions? I'm about to
reload 5c and do a full 
> initialization again. 
> 
> Thanks for any help!
> 
> /michael