Elektron Musical Instruments

Hi,
I'm brand new here as well.  I'm trying to got the MD to trigger samples on the sp-303.  
All night long and no luck.  Here's what I've done:
I set the current kit so that track 16 is a MID synth
I set the MID to the MID-05 machine
I set my sp-303 to receive on MIDI channel 5.
I've played with parameter locking to verify that each step is sending out note data that is 
within range of my SP303 (I tested the sp303 with a keyboard to mack sure it was 
receiving ok).

I've tried all night long....  What am I doing wrong?

thanks,
-tom


--- In elektron-users@yahoogroups.com, "anselmi_daniel" <anselmi_daniel@...> wrote:
>
> --- In elektron-users@yahoogroups.com, "waveform1977"
> <waveform1977@> wrote:
> >
> > > When setting up your kit, make sure to affect a MID machine to 
> > > track 16. Choose appropriate midi channel settings for both the 
> > > machine and your synth. You're done.
> > 
> > Excellent! Thank you very much. It works! :-)
> > The next question is now: How do I assign a different pitch to each
> step? 
> > I have set the following steps (LED is on):
> > [1] [4] [7] [10] [13]
> > 
> > Is it possible to set different notes (e.g. C1 for [1], E1 for[4], C3
> > for [7[, etc.)?
> > 
> > I could not find anything in the manual...
> >
> 
> use parameter locks to change the machine´s midi note
>