Well, having the same problem here. Not to seriout though, so I think I'll just leave it for now... /Patrik Joseph Melnyk wrote: > > > i've taken both md and mnm's apart before. do not use a screwdriver > to pry the knobs off. its tempting, as they're on there very > tightly. but you can do it with just your fingers. just pinch it > with your thumb and first finger and wedge your fingers against the > face plate to apply pressure there while pulling upwards. it'll take > a minute, but they'll come up. the main thing is to pull straight > up. do not put any sideways pressure on or you'll snap the encoder > and you'll have to send the whole unit in to replace it. > > anyway, it can be done and it's not that bad but you just need to be > careful. good luck! > > On Aug 20, 2007, at 7:24 AM, Goktug Citci wrote: > > > Hi, > > > > I had the same problem, I fixed it myself with email help of elektron > > support. > > > > First you have to remove the knobs gently, then remove the plastic > > cover, > > and using two sided stickers, glue the plastic cover again. > > > > Be VERY careful, if you cannot remove a knob, dont force it, > > otherwise that > > knob cannot be repaired.. > > > > I highly suggest you to send to elektron support..or be very very > > careful > > about what you are doin J > > > > Bests > > > > Goktug. > > [Non-text portions of this message have been removed] > >
Message
Re: [elektron] MnM - plastic covering is coming off
2007-08-20 by Patrik "Rydan" Rydberg
Attachments
- No local attachments were found for this message.