Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Message

Re: [elektron] Tap Tempo Implementation is a Major Pain

2003-08-26 by Joe

On Tue, Aug 26, 2003 at 02:15:30PM -0400, Chris Thomas wrote:
>    I don't really think the microsync will help you in this situation. It
>    needs a distinguishable rhythm as input for it's beat detection. Since
>    I'm  guessing  the  pedal has no midi (otherwise problem solved..) you
>    would  have  to  split  the pedal's output off and into the microsync,
>    which would then go wtf are you sending me.. and _maybe_ you would get
>    it to send midi clock/sync to the MD, but I doubt it.
>    I,  however,  use the microsync with my dj mixer, and I can mix the MD
>    with records just fine.. microsync rocks :)
>    -Chris

Chris,
I see your point.  And I thought the exact same thing.  I was thinking
that the microsync *might* work when using a line out of the guitar
phrase sampler with a guitar phrase being played through it.  And I
thought that if that didn't work, it might be possible to use the phrase
sampler's built-in metronome to generate MIDI tempo (via the microsync);
then once the two devices are locked in sync, use the guitar pedal (with
quantizing) as normal.

It very well might not work; but it's an idea.  It's a bit better than
spending $350-ish on a Lexicon Jamman or $800-900 on a Gibson Echoplex.
Which are the only two phrase samplers I know of that can sync to MIDI
tempo.

Joe

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.