Elektron Musical Instruments

Joe,

Cracking open the MD or MM  is not too bad, as long as you have the right screwdriver to do it.  Don't try and open it up with a flat head screw driver that "seems" to fit ok.  You can strip the head and then you are definitely screwed.  

As far as getting then entire front panel off, I had a very difficult time getting the knobs off of the Data Entry Section on the MM.  I ended up just taking off the keyboard portion and then shaking the unit around until I could get to the loose screws bouncing around.  I was unsuccessful in removing the left half of the MM top.  It seems as though the knobs are attached in the same way on the MD.  I just tried and they are very, very tight.  I am afraid of applying too much pressure to get them off without breaking the shaft of the rotary encoders.  Has anyone else been able to accomplish this?

Stacey



      Yahoo! Groups Sponsor 
            ADVERTISEMENT
           
     
     


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]