Elektron Musical Instruments

> Chapter 36 pf DP3 manual (all about sysex)
> 
> it's in the edition window
> 
> - new sequence
> - desactivate multirecord if it's not the case (tracks window mini 
menu)
> - in the Ed. Window, press insert
> - choose system exclusive
> - an input zone for sysex will appear
> - enter a position in the sequence (mesure, time, tick)
> - press tab to open sysex edition window
> - the window opens
> - if needed, enter a request for bulk dump request on top of the 
window
> (only if the synth needs it, not necessary in this case 
_normally_)
> - start transfert from MD
> - data should show up at the bottom of the window
> - click OK to save
> 
> Your doc is a sysex dump now :)
> 
> Denis H]                                 lepetitmartien



 
==================================================
=====
> M.I.C.                          http://www.macmusic.org


Ok - thanks very much for the detailed advice.  I just moved to a 
different city, so my DP manual and computer are currently in two 
different places.  Your help has been most appreciated!