Elektron Musical Instruments

thanks daniel. I tried that thing with the trig select and it seems to have done 
the trick on any patterns i have created. But...... on pattern B03 - Yazza, track 2 
still requires me to go into edit and hit enter to make it sound. Why? It has a 
full trigger on step 1...

Simon






--- In elektron-users@yahoogroups.com, "daniel_elektron" <daniel@e...> 
wrote:
> 
> Just some notes to the problems some people have expressed in here
> lately...
> 
> As of OS1.02 there should be no _major_ bugs in the Monomachine. It is
> well tested by some hundereds of users, and if there were some fatal
> bugs I think we should have known about them. There might be a few
> oversights, and the best you can do is to make a full dump of the
> memory, send it to support@e... together with a detailed
> description on how to recreate the problem. We should then pretty
> quickly be able to see if it's a bug or something else, and if it is a
> bug indeed we should be able to track it down easily if we can
> recreate it.
> 
> What is useful to solve problems is to reset the memory to factory
> default or empty. What is not useful is to reinstall the same OS
> again. That will not make any difference whatsoever. The flash never
> get corrupted, and even if it did you would notice it much more than
> just a strange bug.
> 
> The problems that some people expressed sounds like they slipped on
> the trig track-button down to the right, and programmed a track with
> perhaps only the amp active. The pattern would then sound more or less
> right as it is programmed (only that the filter env and lfo is never
> trigged). But when it is changed to from another pattern the machines
> will never load, as a full trig (amp, filter and lfo) is needed to
> load a machine. So, if you trig the tracks by hand and then press play
> it would sound ok again, but not until then. Check if this is the case
> by selecting trig track "ALL", and then enter grid recordoing mode.
> The first trig of the tracks should be red, indicating that it is a
> full trig that will load the machine. If it is green only part ofthe
> trig tracks are trigged, and the machine will not be loaded. Press the
> corresponding key in trig track "ALL" in grid recording mode to set
> all trig tracks! Hope this solves some problems...
> 
> As for the production quality... The front plate is still produced at
> the same factory in Sweden. Only the final assembly is made in
> Estonia. The case can vary a little from unit to unit, as it is hand made.
> 
> Daniel
> 
> 
> --- In elektron-users@yahoogroups.com, "bachypham" <bachypham@y...> 
wrote:
> > Well, I reinstalled the O.S. and I am still noticing my problems.  
> > Some of my patterns act weird when I switch to them.  My Dpro Bbox 
> > sequence does not trigger correctly.  The thought of having to part 
> > with my MM already frightens me and I have only had it for two 
> > days.  But if my unit is the only isolated case of this phenomena, I 
> > may have to find a solution through the hands of Elektron.  I notice 
> > that the build quality is not as nice as the Machinedrum.  The 
> > faceplate to the casing is not flush with the body... there is a bit 
> > of a gap.  The silkscreen printing is not as neat as it was on the 
> > MD as well.  I notice that the MM is now made in Estonia.  Does 
> > anyone notice this as well?  Should I contact Elektron, or am I only 
> > noticing typical software bugs?
> > 
> > thanks,
> > Bach