Elektron Musical Instruments

Having problems syncing Monomachine from pro Tools. It works fine as a 
master for my Evolver or the way round with my evolver as the master but just 
doesn't like talking to Pro tools. Act very erraticly.

Did you sort this out?



--- In elektron-users@yahoogroups.com, "snmcur2000" <snmcur2000@y...> 
wrote:
> --- In elektron-users@yahoogroups.com, "kernzone" <s070666@s...> 
> wrote:
> > When midi clock is set on "external", sync of MM is incorrect and 
> MM 
> > doesn't follow external tempo changes. Can anybody confirm this?
> > 
> > Thx, Nik
> 
> I hooked up the MnM via midi for the first time last week.  No 
> problems with sync to MD - MnM as master.  Problem occurred when I 
> hooked up sync to a windows based computer running sonar or pro audio 
> (can't remember which).  I was simply recording the audio of the 
> different tracks individually with midi sync.  When the computer was 
> the master, the mono freaked out after about 6 bars and started 
> playing random notes (the computer wasn't sending any MIDI except for 
> transport).  Then I switched the computer to slave/MnM to master and 
> the computer ended up stopping recording each time at ~1min due to 
> some crazy error.  Rebooted and did all the typical troubleshooting 
> stuff with both devices.  Both of these errors recurred each time.  
> HOWEVER, at no time were the devices out of sync (MD was part of the 
> loop the whole time - no problems with it.)
> 
> Bottom line, MnM likes to play alone.