I have to agree with Joseph, being annoyed by your refusal to accept any advice give to you. It is obvious that assigning one parameter to left and one to bottom will allow you to control two different parameters with different curves using the one controller. The joystick is a two axis controller, that is why you can control two different parameters. Moving it left to right affects one parameter, moving it up and down affects another...you can not compare this to a knob which only goes left to right. A knob is a single axis controller, that is why you would need two knobs to control two different parameters with different curves. In terms of your car analogy, you could replace the steering wheel, accelerator and brake with a single joystick...left to right on the joystick would equate to the steering wheel...centre to up on the joystick would replace the accelerator...centre to down on the joystick would replace the brake. This would give you all three normal single axis controllers on the single two axis joystick controller. You can control each parameter with a different curve...moving left to right on the joystick does not affect the up/down position, until you actually move it up or down. You seem to be unable to understand the difference between a single axis knob, and a two axis joystick. It is your stupidity ze2be that is causing the annoyance...maybe you should go back to school and learn your maths over again! Simon Canberra AUSTRALIA -----Original Message----- From: ze2be To: elektron-users@yahoogroups.com Sent: 17/10/2004 1:15 PM Subject: [elektron] Re: external controll of MM? If you are anoyed by your own stupidity, it is not my fault. -----Original Message----- From: ze2be To: elektron-users@yahoogroups.com Sent: 16/10/2004 1:37 AM Subject: [elektron] Re: external controll of MM? Its simple fellas, do your math if you wish! If my language was english, I would easily clear this out for you. But let me try: Either way, if you apply different amount of effect on each controller, they will still follow the same curve, as you only use one master controller, namly the joustick! Tataa!! Was that difficult to understand? If you have seperate knobs, they can go seperate paterns. Think musical, not robot paterns!! Try driving the car moving the stearing wheel, the speed pedal, and the brakes in the eksact same tempo! Id say you need a driving licence ;-) Kim ;-) ---------------------------------------------------------------------------- ------------------------------------------ This email, and any attachments, may be confidential and also privileged. If you are not the intended recipient: Please notify the sender and delete all copies of this transmission along with any attachments immediately. You should not copy or use it for any purpose, nor disclose its contents to any other person. ---------------------------------------------------------------------------- ------------------------------------------
Message
RE: [elektron] Re: external controll of MM?
2004-10-17 by Wheaton, Simon
Attachments
- No local attachments were found for this message.