Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Thread

MD Hello and 0.96b problems

MD Hello and 0.96b problems

2001-07-28 by parker.andrew@btinternet.com

Hi,

At last I've found a place with other MD users.

Just wandering if anyone else has had this problem after flashing to 
firmware 0.96b. Basically I cannot store knob settings anymore and im 
in extended mode.

Also, and I dont know if this was in previous versions, In Scale 
setup when I reduce the amount of steps down to 1/16 whilst its 
playing it will not increase the steps again even the number goes up.

I've reported both problems to elektron support but was just 
wandering if its affected anyone else.

Andy

Re: MD Hello and 0.96b problems

2001-07-28 by parker.andrew@btinternet.com

>Basically I cannot store knob settings anymore and im 
> in extended mode.

This is working now, I was basically going to flash it again thinking 
that may have screwed it up in some way last time. Anyway, after the  
[function] Power on menu. I just switched off for some reason and 
went back in the MD. And it worked. Pretty weird. 

Just tried out 16 LFo's modulating the Filter on a Kick. Very odd 
stuff :).

Andy

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.