Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Thread

Re: [elektron] sync´n MD with hardware sequencer.

Re: [elektron] sync´n MD with hardware sequencer.

2002-04-15 by ripe

My MD doesn't reliably sync to an external source, sometimes it starts a
little late, sometimes it starts OK.

I have to hit PLAY and STOP a couple of times (on the sync naster) to make
sure the MD starts on time and then it usually stays in sync...

I've tried using a future-retro mobius, a Yamaha AW4416, and a Yamaha
RS7000,  the MD has the same problem with all of them.

cheers
ripe
Show quoted textHide quoted text
----- Original Message -----
From: "pretoroq" <pretoroq@...>
To: <elektron-users@yahoogroups.com>
Sent: Monday, April 15, 2002 12:19 PM
Subject: [elektron] sync\ufffdn MD with hardware sequencer.


Hi everyone.
I\ufffdm preparing a live and in my setup I have the MD slaved to a
doepfer regelwerk hardware seq. and sometimes it is not working well.
Has anyone experienced any problems slaving the MD yet? In my case
what happens is that it starts and stops correctly but with no sync.
I have the MD global settings tempo(external) and cntrl in (on).
Any ideas about this may be happening are apreciated?
Thank you
Joao Roquette





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: [elektron] sync´n MD with hardware sequencer.

2002-04-15 by Jared Potter

My MD syncs perfectly every time with my Yamaha RM1X as the sync master...
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: ripe 
  To: elektron-users@yahoogroups.com 
  Sent: Monday, April 15, 2002 11:15 AM
  Subject: Re: [elektron] sync´n MD with hardware sequencer.


  My MD doesn't reliably sync to an external source, sometimes it starts a
  little late, sometimes it starts OK.

  I have to hit PLAY and STOP a couple of times (on the sync naster) to make
  sure the MD starts on time and then it usually stays in sync...

  I've tried using a future-retro mobius, a Yamaha AW4416, and a Yamaha
  RS7000,  the MD has the same problem with all of them.

  cheers
  ripe


  ----- Original Message -----
  From: "pretoroq" <pretoroq@...>
  To: <elektron-users@yahoogroups.com>
  Sent: Monday, April 15, 2002 12:19 PM
  Subject: [elektron] sync´n MD with hardware sequencer.


  Hi everyone.
  I´m preparing a live and in my setup I have the MD slaved to a
  doepfer regelwerk hardware seq. and sometimes it is not working well.
  Has anyone experienced any problems slaving the MD yet? In my case
  what happens is that it starts and stops correctly but with no sync.
  I have the MD global settings tempo(external) and cntrl in (on).
  Any ideas about this may be happening are apreciated?
  Thank you
  Joao Roquette





  Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.