Elektron Musical Instruments

hello all,

  just thought i'd share some tips for using the 'ss' for external 
filtering, while keeping the noise floor at its lowest.

  first put it in 'POLY MODE'. then turn the waveform OFF. then turn ON the 
gate in the 'env' section, and put the sustain to 15. all you novices still 
with me?.....good.
  now this part is up to you, depending on what you like. go to the filter 
page and try LOWP or HIGH for example.  now, if you don't turn on any osc 
the 'ss' will be at it's quietest, but the ext. audio won't be as punchy. 
now try it with one osc on(a little noisier, but your signal is also 
louder).
  if you wanna be cool like me you'll turn on all the ocs's, and assign a 
lfo to cutoff and DCTRL's for cutoff, lfo depth and lfo speed.
  i allways debate wether or not i should share programing tips with people, 
cuz I had to figure it out myself right, plus i think it's funny when people 
buy gear and they cry that they don't like it cuz they can't figure it out, 
but i thought why not share.

peace. sg.


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

Dear friends

I really have to tell you that using my Behringer Autocomm Pro the noise from
the SidStation is no problem for me. Really!! I think that other comp/expanders
would do the job also. Try out this before reselling this lovely box. Or try 
Saul Goode's tip first...

...mathis


Saul Goode schrieb:

  From: "Saul Goode" <luv_hz@...>

  hello all,

    just thought i'd share some tips for using the 'ss' for external
  filtering, while keeping the noise floor at its lowest.

    first put it in 'POLY MODE'. then turn the waveform OFF. then turn ON the
  gate in the 'env' section, and put the blablabla...
  peace. sg.