Yahoo Groups archive

Elektron Musical Instruments

Index last updated: 2026-04-28 23:22 UTC

Thread

Re: [elektron] elektron support / crackling sound on outputs

Re: [elektron] elektron support / crackling sound on outputs

2003-05-20 by Raj

Are you all guys suffering problems in the USA or Canada?

----- Original Message -----
Show quoted textHide quoted text
From: "stevenlebeau" <stevenlebeau@...>
To: <elektron-users@yahoogroups.com>
Sent: Monday, May 19, 2003 9:44 PM
Subject: [elektron] elektron support / crackling sound on outputs


> I've had my MachineDrum for about two weeks, and in that time I've
> discovered intermittent crackling sounds on all six outputs (plus the
> headphone outs). This crackling sound is actually as loud (sometimes
> a bit louder) than the actual drum sound! Twisting the controller
> knobs while pressing down to accelerate the inc/dec speed seems to
> make things worse.
>
> Seeing as I've just bought mine (and the fact that they didn't have
> any in until the beginning of May), I'm assuming my unit was built
> quite recently and thus shouldn't have any of the previous "quality
> control" issues mentioned in previous posts by other users. My unit
> came with 1.12b so I've ruled out any operating system issues.
>
> Thing is, I've e-mailed elektron three times in the last two weeks,
> and I STILL haven't heard back from them.
>
> I'm hoping I won't have to send this thing back to Sweden, but if I
> do I'd like to know right away.
>
> If you've had similar problems with your unit (and you bought yours
> around the same time I did, which was May 1st), please contact me
> privately or publically about how you resolved the situation.
>
> -Steven LeBeau
> stevenlebeau@...
>
> P.S.--if any Elektron employees out there are listening, please get
> in touch with me as soon as possible.
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.