Elektron Musical Instruments

For my the PC updater never worked ... but It was ok on the mac (G3.400 / Mac 9.0.4 / Midiport96)

Try to boot without any extension and test if the prog start.

Rgds

[ F U N K E L E C T R I C ]
[ web site - http://www.funkelectric.com * e-mail - egu@... ]

[ P L A Y A G R A N D E - R E C O R D S ] 
[ web site - http://www.playagrande.net * e-mail -info@... ]

The Rules Have Changed...Get Paid to Surf the Web! 
http://www.alladvantage.com/go.asp?refid=ITB872 

    -----Original Message-----
    From: Reyn Ouwehand <prevue@...>
    To: elektron-users@egroups.com <elektron-users@egroups.com>
    Date: lundi, 19. juin 2000 15:15
    Subject: [elektron] SidUpdater 1.0.2/Mac
    
    
    I'm trying to update my SidStation with the Macintosh version of SidUpdater
    1.0.2. But the program quits with an 'error 1' when he wants to begin his
    test. Does anyone else has this problem?
    
    My OMS set-up is good. ProTools recognises the SidStation. Although I have 3
    devices on that MIDIport of my Studio4 (not MIDI channel).
    
    Cheers,
    
    Reyn Ouwehand.
    
----------------------------------------------------------------------------    
    
    
    
----------------------------------------------------------------------------    
    


[Non-text portions of this message have been removed]

> Try increasing the memory allocation...

I used another Mac for updating the SidStation and that did worked OK.

I didn't use the Studio 4 with more than one synth on each port, but used a
little MIDI-interface from Opcode and connected the in and out directly to
the in and out (thru) of the SidStation. So I think the SidUpdater wants to
have direct contact with the SidStation. In my setup there is even a (AKAI)
MIDI patchbay inbetween the SidStation and the Studio4. (That's because I
have different gears that intercross (?) between eachother..)

Reyn.