Re: [elektron] Noise Reduction & Behringer's Denoiser
2000-08-30 by G.R.C.
Hi I'm using the recommended Behringer Autocom Pro It works really well and its not to expensive I paid $120.99 in American dollars! I think it was a wise investment. G.R.C. ----------
Show quoted textHide quoted text
>From: sophalicus@... >To: elektron-users@egroups.com >Subject: [elektron] Noise Reduction & Behringer's Denoiser >Date: Sun, Aug 27, 2000, 3.56 PM > > Does anyone have any experience using one of the Behringer > Denoisers? My sid allways has this low frequency hum that i can eq out > for the most part leaving the sid sounding pretty thin with little or > no low end(i have one of the first generation ms1202's with only a > fixed lo and high eq). I do use a microgate which works fine and > dandy, but > when the gate is open i have the hum going full tilt unless i have the > lo eq turned down below unity. The other noise i get from the sid is > sort of buzzy and sounds like white noise, i can usually get rid of > this noise by fiddling with the psu plug that connects to the sid, it > works most of the time but has a tendency to cut power and corrupt > everything, which leads me to having to reset the memory and such(i > have gotten into the habbit of saving individual patches as sysex, as > i have lost quite a few before i started doing this). I can allways > get a software plug in(recomendations or experiences are welcome), > but hardware would be nicer. > > chrisitan > > > > >