Re: [elektron] cc machinedrum
2003-12-29 by Ronald Vonk (Roonan)
You mean program changes instead off CC's You set the Program change in the midi machine on the routing page.(on the MD of course) The parameter is PCHG and you can change a program with a parameter lock. Just make sure you use the right midi machine concerning the midi channel and don't forget to save your patches before changing programs. (i lost some good patches this way on my evolver :-( ) Ronald.
Show quoted textHide quoted text
----- Original Message -----
From: Electronic Bizniz
To: elektron-users@yahoogroups.com
Sent: Monday, December 29, 2003 10:57 AM
Subject: [elektron] cc machinedrum
Hi,
I can't find it in the manual but will the machinedrum receive cc data.
I am asking this question because I am sequencing the jomox airbase
with the machinedrum. I have assigned cc data to the sounds of
the airbase but everytime I change sound banks on the airbase
the sounds stay's the same because the machinedrum sends the
same cc data to the airbase. Therefore I need to dump the cc data
from the airbase to the machinedrum, but this is not working.
Any suggestions,
Regards,
Martijn
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/elektron-users/
b.. To unsubscribe from this group, send an email to:
elektron-users-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]