Emax

Hi There
do not put the disk in the floppy drive so it will search for the one on the HD.
Cheers

Colin
  ----- Original Message ----- 
  From: brian_ronn <brian_ronn@...> 
  To: emax@yahoogroups.com 
  Sent: Thursday, February 13, 2003 11:05 PM
  Subject: [emax] EIII harddisk boot problem


  I have the OS2.42 boot disc (the latest OS) for the EIII. I've set 
  the scsi id this way: floppy id=0, hd=1 and EIII=6 but the EIII 
  won't boot from the ST51080N hd. I have also formattet the hd and 
  copyed the software from diskette to hd, but the EIII won't boot 
  from the hd only from floppy. I can access banks on the hd and 
  access any module via the frontpanel but just won't boot.

  Do you know the jumper settings on the Seagate ST51080N hd?

  I'm thinking about putting the hd to an external hd-case and I would 
  want to disconnect the power of the center ventilator which cools 
  the hd (because of the noise), would you advise me not to disconnet 
  the ventilator maybe because of the heat level on the pcb boards?

  Thanx

  Brian




  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]