Emax

Is it Emu III or Emu III XP?

  ----- Original Message ----- 
  From: Colin Ross 
  To: emax@yahoogroups.com 
  Sent: Friday, February 14, 2003 12:14 PM
  Subject: Re: [emax] EIII harddisk boot problem


  Hi There
  do not put the disk in the floppy drive so it will search for the one on the HD.
  Cheers

  Colin
    ----- Original Message ----- 
    From: brian_ronn <brian_ronn@...> 
    To: emax@yahoogroups.com 
    Sent: Thursday, February 13, 2003 11:05 PM
    Subject: [emax] EIII harddisk boot problem


    I have the OS2.42 boot disc (the latest OS) for the EIII. I've set 
    the scsi id this way: floppy id=0, hd=1 and EIII=6 but the EIII 
    won't boot from the ST51080N hd. I have also formattet the hd and 
    copyed the software from diskette to hd, but the EIII won't boot 
    from the hd only from floppy. I can access banks on the hd and 
    access any module via the frontpanel but just won't boot.

    Do you know the jumper settings on the Seagate ST51080N hd?

    I'm thinking about putting the hd to an external hd-case and I would 
    want to disconnect the power of the center ventilator which cools 
    the hd (because of the noise), would you advise me not to disconnet 
    the ventilator maybe because of the heat level on the pcb boards?

    Thanx

    Brian




    Emax and Emax II User's Group Website

    http://www.silveriafamily.com 

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


  [Non-text portions of this message have been removed]


  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]