Emax

Hi again,
Try a new install and set the HD to ID 01. Tell the EIII to look ID 01 on bootup.
Hope this helps.
Regards,
Colin

  ----- Original Message ----- 
  From: brian_ronn <brian_ronn@...> 
  To: emax@yahoogroups.com 
  Sent: Monday, February 17, 2003 11:53 AM
  Subject: [emax] Re: EIII harddisk boot problem


  It is the EIII (keyboard version). I've tried to boot up without the 
  floppydisk in drive but the EIII just keeps scanning the scsi ID's 
  from 0 to 7. The hd is formattet with OS2.42 and I've copied the 
  software from floppy to the hd. I can access any module on the front 
  panel which loads a bit of the OS software from the hd and I can also 
  load entire banks from the hd. It just wont boot. Any suggestions?

  --- In emax@yahoogroups.com, "Pedro H" <sotavento1999@h...> wrote:
  > Is it Emu III or Emu III XP?
  > 
  >   ----- Original Message ----- 
  >   From: Colin Ross 
  >   To: emax@yahoogroups.com 
  >   Sent: Friday, February 14, 2003 12:14 PM
  >   Subject: Re: [emax] EIII harddisk boot problem
  > 
  > 
  >   Hi There
  >   do not put the disk in the floppy drive so it will search for the 
  one on the HD.
  >   Cheers
  > 
  >   Colin
  >     ----- Original Message ----- 
  >     From: brian_ronn <brian_ronn@y...> 
  >     To: emax@yahoogroups.com 
  >     Sent: Thursday, February 13, 2003 11:05 PM
  >     Subject: [emax] EIII harddisk boot problem
  > 
  > 
  >     I have the OS2.42 boot disc (the latest OS) for the EIII. I've 
  set 
  >     the scsi id this way: floppy id=0, hd=1 and EIII=6 but the EIII 
  >     won't boot from the ST51080N hd. I have also formattet the hd 
  and 
  >     copyed the software from diskette to hd, but the EIII won't 
  boot 
  >     from the hd only from floppy. I can access banks on the hd and 
  >     access any module via the frontpanel but just won't boot.
  > 
  >     Do you know the jumper settings on the Seagate ST51080N hd?
  > 
  >     I'm thinking about putting the hd to an external hd-case and I 
  would 
  >     want to disconnect the power of the center ventilator which 
  cools 
  >     the hd (because of the noise), would you advise me not to 
  disconnet 
  >     the ventilator maybe because of the heat level on the pcb 
  boards?
  > 
  >     Thanx
  > 
  >     Brian
  > 
  > 
  > 
  > 
  >     Emax and Emax II User's Group Website
  > 
  >     http://www.silveriafamily.com 
  > 
  >     Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
  Service. 
  > 
  > 
  >   [Non-text portions of this message have been removed]
  > 
  > 
  >   Emax and Emax II User's Group Website
  > 
  >   http://www.silveriafamily.com 
  > 
  >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
  Service. 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]