Emax

Hi I have the slimline floppy converter and drive, I was hoping there was a way to get you to modify the slimline converter for me. I've had this emax for a couple years and once the drive died, I've been stuck. is there chance you could help or recommend someone who might?
Thanks 

     On Thursday, December 18, 2014 12:55 AM, "emma jammie.emma@... [emax]" <emax@yahoogroups.com> wrote:
   

     You can use them in the emax
Just save as wav file then use emxp to make a emax sample from them you can save them
In 16k 32k 64k 128k 256k
The only problem is that they start at sample 1 and loop from sample 1 and the loop from last sample emax or most emu samplers dont allow this
Because of the interpolation engine it needs several samples before sample end and needs samples before loop start its also used in the sf2 format and the sample even after truncation will leave About 32 samples after loop end
So you will need an editor to accomplish this

Sent from Samsung Mobile


-------- Original message --------
From: "'bmacdoug1 .' jasonmcdougal@... [emax]" <emax@yahoogroups.com> 
Date: 18/12/2014 05:45 (GMT+00:00) 
To: emax@yahoogroups.com 
Subject: Re: [emax] Re: Jammie emma, i cannot reach 
 

   Ted, Garth and Jammie need to be cloned.....(i thank you guys for being accessible resources of knowledge) Speaking of music creation.

Have anybodys used the PADsynth Algorithm " It generates a perfectly looped wavetable sample whichcan be used in instruments"

http://zynaddsubfx.sourceforge.net/doc/PADsynth/PADsynth.htm

I know the Emax can't do wavetable looping but maybe the others that can might be suitable.




On Wed, Dec 17, 2014 at 4:07 PM, emma jammie.emma@blueyonder.co.uk [emax] <emax@yahoogroups.com> wrote:
     Thanks as was mentioned I was away in france in a remote place away from the world 
I did mention it as did my wife
My wife did mesage to say I would contact when I get back from france which I did as I got back late thos afternoon
Alls good thanks jammie

Sent from Samsung Mobile


-------- Original message --------
From: "carlthepianist@... [emax]" <emax@yahoogroups.com> 
Date: 17/12/2014 23:44 (GMT+00:00) 
To: emax@yahoogroups.com 
Subject: Re: [emax] Re: Jammie emma, i cannot reach 
 

   Hi guys, 

this topic has spun out of control,

I simply could not contact jammie, but jammie has since emailed me personally and i have just sent him a email regarding my questions and making my final payment after the work is complete.

I apologize to all as the original intention of this forum post was to find a different means to get in contact with jammie.

Thanks to Ted and Garth and Jammie

When i have my emax is back if anyone is interested i will take some pics of the work done to her :)