Emax

Hi,
Details of the upgrade are here:

http://www.emulatorarchive.com/Samplers/EmaxOverview/EmaxSCSI/emaxscsi.html

Check you have the right motherboard, PAL chip, Boot ROM and SCSI chip.

It may be that the Plus OS software is built on the SE code base, in which
case you may need an SE model to start with. However the E-mu Systems
upgrade documentation is not specific about HD or HD SE. "wrong software" is
the error messge from a non-SE Emax when booting from SE software.

Rob

  I recently installed the zip upgrade, am I correct, on an emax hd
  model, you only need to replace the cable leading to the harddrive to
  a nexternal zip drive using a connector (only one cable actually has
  to be altered, right?) and install the emax plus os, however the emax
  software I b ought from emulator archive gives me the "wrong
  software" error. I doubt it could be their fault, but I've triple
  checked my work now and have done nothing wrong...
  any help would be fabulous
  ~AJB


        Yahoo! Groups Sponsor



  Emax and Emax II User's Group Website

  http://www.silveriafamily.com

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]