Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Message

Re: [emax] bizarre Emax I problem...

2003-08-28 by S. Glitsos

Well, it loads the factory disks just fine, every bit perfectly (yes, I've
gone through every single preset on the disks...).  It's just when I format
a disk.. it's VERY consistent in how it doesn't work, so I doubt that it's
just dirty.

Example:  I'll format an Emu disk, which previously worked (I know, I
know... I just wanted to see if I just had a load of crappy disks), but when
formatted it STOPS working.

I'm not even using a PC, so the virus thing isn't really possible.

I don't know.

Any other ideas?

stavros

on 8/28/03 2:05 PM, Bob Conner at rennocbob@... wrote:

> Sounds like the Emax is not reading the disks
> properly.
> Have you tried cleaning your floppy disk drive with a
> cleaning disk?
> Are you putting these floppies in a PC that has a
> Virus?
> 
> Bob
> --- sglitsos <sglitsos@...> wrote:
>> (sorry if this double or triple posts, my posting
>> doesn't seem to 
>> be working...)
>> 
>> Okay, my Emax has developed a really, really weird
>> problem:
>> 
>> If I try and load a disk that I format, the Emax
>> flashes "Different
>> Software Rev" -- even though it's not!  It'll load
>> the official Emu
>> disks that I have just fine, it formats the disk
>> just fine, it copies
>> software, etc.... but when I actually try and use
>> the disk, I get the
>> different rev error.
>> 
>> It'll boot normally off the official Emu disk.. if I
>> try and boot off a
>> disk that I made, it hangs at "E-mu Systems Inc.
>> Loading 
>> Software."  It also emits some really weird stuff -
>> like rising then
>> descending tones, amazing sounding drones (they're
>> good 
>> enough to sample, funny huh?), weird wobblies.
>> 
>> I don't get it.  I've done everything at my
>> disposal... changed
>> disks, used different OSes (I have 3.2 and SE 1.1 on
>> disk -- yes, 
>> I'm sure that I was using the right disk with the
>> right OS and all
>> that).  I swapped drives with an inoperable Emax
>> that I have for 
>> parts, same thing.
>> 
>> This is really weird, it's been working fine up
>> until now.  Can 
>> someone help me out?
>> 
>> --Stavros (frustrated)
>> 
>> 
>> 
> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.