Emax

I solved the problem with the loops. It turned out that the loop lenght 
recieved by the emax was one sample too short. When I add one sample to 
the lenght, it plays back perfectly.

Anpouther quiestion though - In soundforge, it is possible to set the 
not number (D5 for example). Is it possible to make the emax recieve 
this information and place the sample by itself, or do i have to 
manually specify the sample number each time when sending the sample?

/Jens

Jens Hellqvist wrote:

> Yep!
> You were right, when I turn the loop on in digital processing, it loops. 
> But it's not quite the same smooth loop that i created in soundforge - 
> it kindof glitches in the loop-points.  The loop start point is correct 
> when recieved into the emax, as is the lenght of the loop. Anyone got 
> any experience in this area?
> 
> /Jens
> 
> 
> 
> 
> John Silveria wrote:
> 
> 
>>If I remember right the loop points are sent, but not the instructions to turn the looping 
>>on. After sending the looped sample to the Emax II go into Digital Processing - 4 "Mode" 
>>and turn Loop On.
>>
>>On 2 Aug 2004 at 17:14, superautomatic2000 spoke unto me:
>>
>>
>>
>>>Hi again. I've configured the sds midi transfer of samples to my emax
>>>II, and it works ok. I've got a question though: is it possible to
>>>send loop information with the sample? As I remember it this was
>>>possible when i uploaded samples to my akai s2000. It would be great
>>>if i could do that with the emax as well.
>>>
>>>(I have an emax ii, and i am using soundforge to send samples)
>>
>>
> 
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>