Emax

Hi again. I've configured the sds midi transfer of samples to my 
emax II, and it works ok. I've got a question though: is it possible 
to send loop information with the sample? As I remember it this was 
possible when i uploaded samples to my akai s2000. It would be great 
if i could do that with the emax as well.

(I have an emax ii, and i am using soundforge to send samples)

/Jens

If I remember right the loop points are sent, but not the instructions to turn the looping 
on. After sending the looped sample to the Emax II go into Digital Processing - 4 "Mode" 
and turn Loop On.

On 2 Aug 2004 at 17:14, superautomatic2000 spoke unto me:

> Hi again. I've configured the sds midi transfer of samples to my emax
> II, and it works ok. I've got a question though: is it possible to
> send loop information with the sample? As I remember it this was
> possible when i uploaded samples to my akai s2000. It would be great
> if i could do that with the emax as well.
> 
> (I have an emax ii, and i am using soundforge to send samples)

-- 
                          John Silveria II
                   AIM & Yahoo! Messenger: EmaxJS
                        MSN: emaxjs@...
     The Silveria Family Website & Emax and Emax II User's Group
                    http://www.silveriafamily.com

Yep!
You were right, when I turn the loop on in digital processing, it loops. 
But it's not quite the same smooth loop that i created in soundforge - 
it kindof glitches in the loop-points.  The loop start point is correct 
when recieved into the emax, as is the lenght of the loop. Anyone got 
any experience in this area?

/Jens




John Silveria wrote:

> If I remember right the loop points are sent, but not the instructions to turn the looping 
> on. After sending the looped sample to the Emax II go into Digital Processing - 4 "Mode" 
> and turn Loop On.
> 
> On 2 Aug 2004 at 17:14, superautomatic2000 spoke unto me:
> 
> 
>>Hi again. I've configured the sds midi transfer of samples to my emax
>>II, and it works ok. I've got a question though: is it possible to
>>send loop information with the sample? As I remember it this was
>>possible when i uploaded samples to my akai s2000. It would be great
>>if i could do that with the emax as well.
>>
>>(I have an emax ii, and i am using soundforge to send samples)
> 
>

I solved the problem with the loops. It turned out that the loop lenght 
recieved by the emax was one sample too short. When I add one sample to 
the lenght, it plays back perfectly.

Anpouther quiestion though - In soundforge, it is possible to set the 
not number (D5 for example). Is it possible to make the emax recieve 
this information and place the sample by itself, or do i have to 
manually specify the sample number each time when sending the sample?

/Jens

Jens Hellqvist wrote:

> Yep!
> You were right, when I turn the loop on in digital processing, it loops. 
> But it's not quite the same smooth loop that i created in soundforge - 
> it kindof glitches in the loop-points.  The loop start point is correct 
> when recieved into the emax, as is the lenght of the loop. Anyone got 
> any experience in this area?
> 
> /Jens
> 
> 
> 
> 
> John Silveria wrote:
> 
> 
>>If I remember right the loop points are sent, but not the instructions to turn the looping 
>>on. After sending the looped sample to the Emax II go into Digital Processing - 4 "Mode" 
>>and turn Loop On.
>>
>>On 2 Aug 2004 at 17:14, superautomatic2000 spoke unto me:
>>
>>
>>
>>>Hi again. I've configured the sds midi transfer of samples to my emax
>>>II, and it works ok. I've got a question though: is it possible to
>>>send loop information with the sample? As I remember it this was
>>>possible when i uploaded samples to my akai s2000. It would be great
>>>if i could do that with the emax as well.
>>>
>>>(I have an emax ii, and i am using soundforge to send samples)
>>
>>
> 
> 
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.com 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>

The loop glitch is common. When you load Emax banks into an Emax to and it expands 
them to 16 bits the the loops are often off by a few samples as well.

SDS does not allow for note information. Just the sample data itself with the loop 
markers.

On 2 Aug 2004 at 20:14, Jens Hellqvist spoke unto me:

> I solved the problem with the loops. It turned out that the loop
> lenght recieved by the emax was one sample too short. When I add one
> sample to the lenght, it plays back perfectly.
> 
> Anpouther quiestion though - In soundforge, it is possible to set the
> not number (D5 for example). Is it possible to make the emax recieve
> this information and place the sample by itself, or do i have to
> manually specify the sample number each time when sending the sample?

-- 
                          John Silveria II
                   AIM & Yahoo! Messenger: EmaxJS
                        MSN: emaxjs@...
     The Silveria Family Website & Emax and Emax II User's Group
                    http://www.silveriafamily.com

Hi agian!

I'm looking for a powerful piano for my emax II. I've tried the 9ftgrand 
disk and the grand piano 1 & 2, but they do not suit my needs. I'm 
looking for a bit more bite in the sound, like an old piano played with 
powerful strokes. Anyone that has any ideas where to find one?

/jens