Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Message

Re: [emax] Re: connecting zip drive to emax 2

2005-06-01 by Alex Pereda

Do you think the emax sounds better than the Emax II?

I hear you about the external drives, I have my share of them,  add  
to that the Emax II's internal drive and its a symphony.. I use a  
Powerbook when doing music now, so I turn my PC off and that helps,  
but can't turn off the Ext. drives.


I'm interested in hearing your opinion on the sound difference  
between the two samplers..

saludos

On May 31, 2005, at 6:39 PM, elmacaco wrote:

> the emax II can't replace the emax IMO, my Emax's internal HD is  
> somewhat loud, but I have seen others that are very quiet.  My  
> Glyph and seagate externals however are noisy as hell, about as  
> load as my computer.  I use zip drives pretty much exclusively now,  
> with the emax anything larger is a waste since it on;y saves 20MB's  
> per zip, I was hoping it might recognize a flash card reader and I  
> could use 20MB or 32 Mb cards to waste less space, but I always  
> have zips around, so I don't care so much.
>   ----- Original Message -----
>   From: Alex Pereda
>   To: emax@yahoogroups.com
>   Sent: Tuesday, May 31, 2005 8:06 PM
>   Subject: Re: [emax] Re: connecting zip drive to emax 2
>
>
>   Thanks for the info.
>
>   I don't remember which drive I installed, but it's louder than my  
> PC,
>   and my PC is loud, so imagine both of them going at the same time
>   it's annoying , to say the least.
>
>   I'm actually using my EMAX Se, (IKE edition), because it doesn't  
> make
>   that much noise. My Emax II was a recent addition and I don't have
>   many sounds that I need from it, I was in the process of loading the
>   Emax Se sound to the Emax II, but ran into some disapointing  
> results,
>   so I'm think of recording the samples in the computer and maybe
>   resample them into the Emaxx II.
>
>   I don't know if this is a good idea, I'm open to suggestions.
>
>
>   thanks
>
>
>   On May 31, 2005, at 4:PM, David Mattock wrote:
>
>
>> I have been selling HD's on ebay for the past 5 years.  It is
>> becoming very difficult to find the used drives now so I don't sell
>> many anymore so I am happy to share what I know.
>>
>> The Quantum Maverick 500mb is nice and quiet and so is the Quantum
>> Prodrive LPS 80-700mb.  The conner drives that I tried were
>> horrible.  They spun up quickly enough but I could hear them from the
>> other room.
>>
>> One of my Emax II's at home in my studio has two Quantum Prodive LT
>> 730mb drives in it.  They format to about 690mb.  But you can hear
>> them.  I know people are generally looking for the quietest thing out
>> there but with the age of these older HD's you are never going to
>> find anything that is silent.  I have always recorded my synth tracks
>> direct and when it's time to use a mic I just turn everything else
>> off.  That or get a vocal booth that you can use.  For live
>> performace who cares about a little HD noise if you can hear that
>> over the sound of the crowd then you didn't sell enough tickets.
>>
>> Anyway I suggest looking for the Quantum Maverick 500 or the Quantum
>> Prodrive LPS 500 (540S) Put a jumper on A0 this will set the drive to
>> SCSI ID#1 and go for it.
>>
>> Madtux
>>
>>
>>
>>
>> --- In emax@yahoogroups.com, Alex Pereda <alex@N...> wrote:
>>
>>
>>> Is it possible to boot from the Zip drive?
>>>
>>> I installed an internal HD on my Emax II and they noise it makes
>>>
>>>
>> is
>>
>>
>>> pretty loud, So I want to remove it and just use a zip drive I have.
>>>
>>> Does anyone in the group know of HD model that is quiet?
>>>
>>>
>>> thanks
>>>
>>>
>>> On May 31, 2005, at 7:12 AM, Grandmaster Slice wrote:
>>>
>>>
>>>
>>>> Yes.I connected everything & it's working wonderfully.I can't
>>>> believe I've
>>>> been using this Emax II for all these years without getting a
>>>>
>>>>
>> zip
>>
>>
>>>> drive.So
>>>> much faster,easier access to my sounds,& LESS DISCS!  Thanks for
>>>> your help.
>>>>
>>>> -----Original Message-----
>>>> From: emax@yahoogroups.com [mailto:emax@yahoogroups.com]On Behalf
>>>>
>>>>
>> Of
>>
>>
>>>> elmacaco
>>>> Sent: Monday, May 30, 2005 2:04 PM
>>>> To: emax@yahoogroups.com
>>>> Subject: Re: RE: [emax] Re: connecting zip drive to emax 2
>>>>
>>>>
>>>> Doesn't the emax II have a scsi port?
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Grandmaster Slice" <slice@w...>
>>>> To: <emax@yahoogroups.com>
>>>> Sent: Monday, May 30, 2005 1:22 PM
>>>> Subject: RE: RE: [emax] Re: connecting zip drive to emax 2
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> How do I externalize the SCSI indside my Emax II?
>>>>>
>>>>> -----Original Message-----
>>>>> From: emax@yahoogroups.com [mailto:emax@yahoogroups.com]On
>>>>>
>>>>>
>> Behalf
>>
>>
>>>>> Of Brian
>>>>> Ronn
>>>>> Sent: Monday, May 30, 2005 1:11 PM
>>>>> To: emax@yahoogroups.com
>>>>> Subject: SV: RE: [emax] Re: connecting zip drive to emax 2
>>>>>
>>>>>
>>>>> Hi
>>>>>
>>>>> The difference between SCSI and Parallel is the communication
>>>>> interface.
>>>>>
>>>>>
>>>>>
>>>> The
>>>>
>>>>
>>>>
>>>>> Emax cannot use a parallel zip drive. Your computer can. The
>>>>>
>>>>>
>> Emax
>>
>>
>>>>> can use
>>>>> the SCSI zip drive but you have to externalize the SCSI inside
>>>>>
>>>>>
>> the
>>
>>
>>>>> Emax to
>>>>> take advantage of an external SCSI zip drive.
>>>>>
>>>>> Best regards
>>>>>
>>>>> Brian
>>>>>
>>>>> Grandmaster Slice <slice@w...> skrev:
>>>>> What's the difference between a scsi & parallel zip drive?
>>>>>
>>>>> -----Original Message-----
>>>>> From: emax@yahoogroups.com [mailto:emax@yahoogroups.com]On
>>>>>
>>>>>
>> Behalf Of
>>
>>
>>>>> i5c4r7
>>>>> Sent: Thursday, April 28, 2005 4:32 PM
>>>>> To: emax@yahoogroups.com
>>>>> Subject: [emax] Re: connecting zip drive to emax 2
>>>>>
>>>>>
>>>>> Hi, I have the same setup myself, except I have no internal HD.
>>>>>
>>>>>
>> A
>>
>>
>>>>> few
>>>>> things you can check:
>>>>>
>>>>> -Is the termination switch on the zip drive turned on or off?
>>>>>
>>>>>
>> If it
>>
>>
>>>>> is the only external HD, it should be turned on.
>>>>>
>>>>> -Does your internal HD have jumpers set to give it a SCSI ID?
>>>>>
>>>>>
>> If
>>
>>
>>>>> not,
>>>>> when the zip drive is hooked up, your EmaxII could be confused
>>>>>
>>>>>
>> as to
>>
>>
>>>>> which device should be taking SCSI device number 5 or 6
>>>>>
>>>>>
>> (depending on
>>
>>
>>>>> what you have your drive set to).
>>>>>
>>>>> -Are you positive it is a SCSI zip drive?  Believe it or not, I
>>>>>
>>>>>
>> have
>>
>>
>>>>> heard stories about people who purchased second hand zip drives,
>>>>> assuming that they are SCSI but, apparently they actually turned
>>>>>
>>>>>
>> out
>>
>>
>>>>> to be parallel zip drives.  I'm not sure how true this is but,
>>>>>
>>>>>
>> they
>>
>>
>>>>> would both be 25db ports so, they would look very much alike.
>>>>>
>>>>> good luck!
>>>>>
>>>>> -s*
>>>>>
>>>>> --- In emax@yahoogroups.com, "fred" <dhffl_landsharks@y...>
>>>>>
>>>>>
>> wrote:
>>
>>
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> hello i was wondering if someone could help me with this.
>>>>>> i have an emax2 i recently bought an external iomega zip 100
>>>>>>
>>>>>>
>> which i
>>
>>
>>>>>> hooked up to the scsi port on the back of the emax, powered up
>>>>>>
>>>>>>
>> the
>>
>>
>>>>>> drive and then turned on the emax. when the zip drive is
>>>>>>
>>>>>>
>> hooked
>>
>>
>>>>>> up my
>>>>>> emax cannot find it or my internal hd which is scsi#1. floppy is
>>>>>> scsi#0 zip drive is not found at all. i'm sure i'm doing
>>>>>>
>>>>>>
>> somthing
>>
>>
>>>>>> wrong but i cannot find out what. any help would be greatly
>>>>>> appreciated.
>>>>>> thank you.
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Emax and Emax II User's Group Website
>>>>>
>>>>> http://www.silveriafamily.com
>>>>> Yahoo! Groups Links
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.322 / Virus Database: 267.3.0 - Release Date:
>>>>>
>>>>>
>> 5/30/2005
>>
>>
>>>>>
>>>>> --
>>>>> No virus found in this outgoing message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.322 / Virus Database: 267.3.0 - Release Date:
>>>>>
>>>>>
>> 5/30/2005
>>
>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Emax and Emax II User's Group Website
>>>>>
>>>>> http://www.silveriafamily.com
>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------
>>>>> Yahoo! Groups Links
>>>>>
>>>>>    To visit your group on the web, go to:
>>>>> http://groups.yahoo.com/group/emax/
>>>>>
>>>>>    To unsubscribe from this group, send an email to:
>>>>> emax-unsubscribe@yahoogroups.com
>>>>>
>>>>>    Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>>>>> Service.
>>>>>
>>>>>
>>>>>
>>>>> [Non-text portions of this message have been removed]
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Emax and Emax II User's Group Website
>>>>>
>>>>> http://www.silveriafamily.com
>>>>> Yahoo! Groups Links
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.322 / Virus Database: 267.3.0 - Release Date:
>>>>>
>>>>>
>> 5/30/2005
>>
>>
>>>>>
>>>>> --
>>>>> No virus found in this outgoing message.
>>>>> Checked by AVG Anti-Virus.
>>>>> Version: 7.0.322 / Virus Database: 267.3.0 - Release Date:
>>>>>
>>>>>
>> 5/30/2005
>>
>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Emax and Emax II User's Group Website
>>>>>
>>>>> http://www.silveriafamily.com
>>>>> Yahoo! Groups Links
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> Emax and Emax II User's Group Website
>>>>
>>>> http://www.silveriafamily.com
>>>> Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Anti-Virus.
>>>> Version: 7.0.322 / Virus Database: 267.3.1 - Release Date:
>>>>
>>>>
>> 5/31/2005
>>
>>
>>>>
>>>> --
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Anti-Virus.
>>>> Version: 7.0.322 / Virus Database: 267.3.1 - Release Date:
>>>>
>>>>
>> 5/31/2005
>>
>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------ Yahoo! Groups Sponsor -------------------
>>>>
>>>>
>> -
>>
>>
>>>> ~-->
>>>> In low income neighborhoods, 84% do not own computers.
>>>> At Network for Good, help bridge the Digital Divide!
>>>> http://us.click.yahoo.com/c9hWNA/3MnJAA/n1hLAA/QnLolB/TM
>>>> ------------------------------------------------------------------
>>>>
>>>>
>> -- 
>>
>>
>>>> ~->
>>>>
>>>> Emax and Emax II User's Group Website
>>>>
>>>> http://www.silveriafamily.com
>>>> Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>>
>> ------------------------ Yahoo! Groups Sponsor --------------------
>> ~-->
>> What would our lives be like without music, dance, and theater?
>> Donate or volunteer in the arts today at Network for Good!
>> http://us.click.yahoo.com/rKxVKC/SOnJAA/n1hLAA/QnLolB/TM
>> --------------------------------------------------------------------
>> ~->
>>
>> Emax and Emax II User's Group Website
>>
>> http://www.silveriafamily.com
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
>   Emax and Emax II User's Group Website
>
>   http://www.silveriafamily.com
>
>
>
> ---------------------------------------------------------------------- 
> --------
>   Yahoo! Groups Links
>
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/emax/
>
>     b.. To unsubscribe from this group, send an email to:
>     emax-unsubscribe@yahoogroups.com
>
>     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of  
> Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------ Yahoo! Groups Sponsor -------------------- 
> ~-->
> In low income neighborhoods, 84% do not own computers.
> At Network for Good, help bridge the Digital Divide!
> http://us.click.yahoo.com/c9hWNA/3MnJAA/n1hLAA/QnLolB/TM
> -------------------------------------------------------------------- 
> ~->
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.com
> Yahoo! Groups Links
>
>
>
>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.