Emax

J R,

Thanks for your advice and for answering my mail too. I swapped all 
the boards (CPU + daughter and analog output), except the 
display/buttons board which is incompatible. After the swap i got 
this:

At the first power on all lights turn on, including the FD one and 
the LCD displays a horizontal black "bar" in the bottom row. If i 
turn off and on, only two of the three "normal" lights turn on, there 
is no LCD output and the FD light turns on too. Thanks,

Diego

--- In emax@yahoogroups.com, J R <bjbearorl@y...> wrote:
> Switch out both boards in both machines, not just the
> daughter/upgrade board.  I had the same situation and
> it didn't work by just switching the daughter boards.
> 
> They fit rack and keyboard.  I did have an odd problem
> with sampling after.  The key position got transposed
> somehow and everything I sampled was out of tune and
> had to be transposed up.  I don't know if it's the
> keyboard controller interface or what but it was a
> pain and took some hard thinking to figure out what
> was going on.
> 
> GOod luck!
> 
> --- bishop1973ar <dhpb@c...> wrote:
> 
> > Hi,
> > 
> > I read some old messages concerning board swapping
> > between an Emax 2 
> > rack and a keyboard. I have a 2mb KB and a 8mb rack
> > and i'd like to 
> > have them the other way around. Can anybody give me
> > some advice ? 
> > Thanks,
> > 
> > Diego
> > 
> > 
> > 
> 
> 
> 
> 		
> __________________________________ 
> Yahoo! Mail - PC Magazine Editors' Choice 2005 
> http://mail.yahoo.com