Emax

PS:

My Internal ZIP would will not allow me to set the ID to O which (i 
think) is the default setting on the Emax.
Will i need to first boot the Emax from floppy with a HD SE Plus OS 
to set the ID to 1 (My ZIP 100 is set to 1) in order to bring it up?
Where is this setting stored? On the a Memory chip on the mainboard?
Or is it a case where the HD OS Plus automatically checks for 
Devices on all ID's.

Thanks a lot,
D

--- In emax@yahoogroups.com, "dawid_marciniak" <dawid.marciniak@...> 
wrote:
>
> Hi everyone, 
> 
> I have a few questions regarding ZIP100 Drives, Zip Disks and 
> Images. Hope somone here can clear up the confusion.
> 
> First I would like to find out if it is possible to make a 
Disk2File 
> image of a ZIP100 Emax floppy on WinXP(I am quite sure that 
> Disk2File will only work using a SCSI Zip disk connected to the 
PC).
> 
> Will i face any problems?
> 
> Then assuming that works, does anyone have a EMAX SE HD Plus 
ZIP100 
> Disk2File image ?
> 
> I have a broken floppy drive and would like to replace it with a 
> internal SCSI ZIP100 thats laying around here.
> 
> My only problem is that i cannot create format a ZIP100 disk and 
put 
> HD SE plus OS on it.
> 
> I guess the Plus os will be necessary to tell the emax what ID the 
> ZIP drive is set to.
> 
> I don't even know if all this is possible without actually having 
> the EMAX up and setting up the ID on the emax beforehand to pick 
up 
> the ZIP drive.
> 
> A lot confusion. Hope somone can help.
> 
> Many thanks in advance. 
> D
>