Emax

First, Hi to All, new Member here!
Secondly, to Dawid:
Using an internal ZIP100 as the boot Drive isn't a Myth at all.
At least my Drive (Z100SI) works a treat.
To set it to SCSI ID0: Remove all three adressing Jumpers.
Here's the Procedure I got it work:
1. Set the ZIP to any ID except 0.
2. Boot Emax with OS Plus from Floppy.
3. Use the Transpose Button to select the same ID the ZIP is set to.
4. Format the ZIP.
5. Set the ZIP to ID0.
Now Emax will boot from ZIP.

Greetings, Henning

--- In emax@yahoogroups.com, "dawid_marciniak" <dawid.marciniak@...> 
wrote:
>
> Hi everyone, 
> 
> I have a few questions regarding ZIP100 Drives, Zip Disks and 
> Images. Hope somone here can clear up the confusion.
> 
> First I would like to find out if it is possible to make a 
Disk2File 
> image of a ZIP100 Emax floppy on WinXP(I am quite sure that 
> Disk2File will only work using a SCSI Zip disk connected to the PC).
> 
> Will i face any problems?
> 
> Then assuming that works, does anyone have a EMAX SE HD Plus ZIP100 
> Disk2File image ?
> 
> I have a broken floppy drive and would like to replace it with a 
> internal SCSI ZIP100 thats laying around here.
> 
> My only problem is that i cannot create format a ZIP100 disk and 
put 
> HD SE plus OS on it.
> 
> I guess the Plus os will be necessary to tell the emax what ID the 
> ZIP drive is set to.
> 
> I don't even know if all this is possible without actually having 
> the EMAX up and setting up the ID on the emax beforehand to pick up 
> the ZIP drive.
> 
> A lot confusion. Hope somone can help.
> 
> Many thanks in advance. 
> D
>