Emax

i did a SE upgrade myself creating the floppy from dos, just following the
directions you can find on this mailing list homepage. 

http://www.silveriafamily.com/emax/emax_repair.html

check it out, easy step by step instructions

davide

>-- Original Message --
>To: emax@yahoogroups.com
>From: "peter_vh01" <petervh@...>
>Date: Sun, 28 May 2006 20:09:55 -0000
>Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths...
>Reply-To: emax@yahoogroups.com
>
>
>Actually, I decided to go ahead, and I installed DOS 6.22 onto an old
>box I had kicking around.
>
>Ran the software, created the disk, but when I run the disk I first
>get the message 'BAD BANKS' and then 'WRONG SOFTWARE'. Anyone else
>ever experience this? I took the SE software off of the Files section
>on this group.
>
>- Peter
>
>--- In emax@yahoogroups.com, "elmacaco" <elmacaco@...> wrote:
>>
>> I can make you an SE upgrade disk, if you like,  it's $25 for the
>trouble.
>> 
>> The good news then is you can run the Plus OS and have all the Emax
>features.
>> 
>> 
>>   ----- Original Message ----- 
>>   From: peter_vh01 
>>   To: emax@yahoogroups.com 
>>   Sent: Sunday, May 28, 2006 12:18 PM
>>   Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other
>Synths...
>> 
>> 
>>   Ah, no according to this site,
>>   http://www.silveriafamily.com/emax/emax_overview.html HD 1.1 came out
>>   before the SE.
>> 
>>   I don't really feel like going through the effort of setting up a DOS
>>   machine with a FAT drive to get an SE install disk. Is it truly not
>>   possible to send arpeggiated sequences through the midi out with the
>>   version I am running? Or perhaps it's just a setting somewhere I need
>>   to adjust?
>> 
>>   - peter
>> 
>>   --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>>   >
>>   > OK,
>>   > 
>>   > So how can I find out if my EMAX has the SE revision on it?
>According
>>   > to what it says under Master --> Special, my HD has the version
>"Emax
>>   > HD Rev. 1.1" installed. Is this the SE version? According to some
>>   > websites I was looking at, it should say "Emax SE HD Rev
>1.1"..perhaps
>>   > there just wasn't enough space on the display to include the SE?
>>   > 
>>   > - Peter
>>   > 
>>   > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
>>   > >
>>   > > Err, great find then for me and you´re right, just tried it,
>works on
>>   > > both my Emax´ with SE and Plus Software, honestly I can´t remind
>>   > > reading that this was obviously changed with these
>software-versions,
>>   > >  "shocking" news ;-), I never tried this with them until A
>MOMENT AGO,
>>   > > just because I am sure on Emax 1 Software version 3.2 this did NOT
>>   > > work, right ? If anyone can please confirm. In MASTER menu >
>Special >
>>   > > MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated
>notes
>>   > > running, so on my old non SE- Emax in the same menu you could
>only see
>>   > > the note transmitted you pushed if I remember correctly, but
>not the
>>   > > arpeggiated notes (inbetween). Let me know someone with OS 3.2
>if I´m
>>   > > right then it´s working only on SE and Plus OS, and thx again
>for that
>>   > > info.  
>>   > > 
>>   > > RR  
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > 
>>   > > --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote:
>>   > > >
>>   > > > err, that's odd then, becuase i'm using my emax as a master
>>   > > controller (via atari ST 
>>   > > > cubase) to record arpeggiated lines to my microkorg & jx3p
>without
>>   > > any problem.  Cubase 
>>   > > > records all arpeggiated notes with no problem and plays them
>back. 
>>   > > Also works if directly 
>>   > > > connected to external synth....  It does send arpeggiator to
>>   midi out.
>>   > > > 
>>   > > > Cheers
>>   > > > 
>>   > > > Simon
>>   > > > 
>>   > > > 
>>   > > > 
>>   > > > --- In emax@yahoogroups.com, "rascalrevenge"
><rascalrevenge@> wrote:
>>   > > > >
>>   > > > > No, if doing so you´d still need to have the arpeggiator
>turned
>>   > on and
>>   > > > > running into the same problem, the damn arp. just doesn´t
>transmit
>>   > > > > arpeggiated notes out, not even internal, whoever made that
>>   > decission
>>   > > > > @ E-mu back then.... &%$§"!. 
>>   > > > > 
>>   > > > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and
>>   > transmits
>>   > > > > over MIDI, even on an independent MIDI Channel.
>>   > > > > 
>>   > > > > RR
>>   > > > > 
>>   > > > > 
>>   > > > > 
>>   > > > > 
>>   > > > > 
>>   > > > > 
>>   > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>>   > > > > >
>>   > > > > > Hmm, just a thought, might it be possible to record an
>>   arpeggiated
>>   > > > > > sequence with the sequencer, and play that back through
>the midi
>>   > > port?
>>   > > > > > 
>>   > > > > > - Peter
>>   > > > > > 
>>   > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
>>   > > > > > >
>>   > > > > > > Gah! So there is no possible way to use the Emax
>Arpeggiator
>>   > > to drive
>>   > > > > > > other gear? What a shame!
>>   > > > > > > 
>>   > > > > > > Anybody know of any affordable midi modules out there
>that can
>>   > > do a
>>   > > > > > > good job of this?
>>   > > > > > > 
>>   > > > > > > - Peter
>>   > > > > > > 
>>   > > > > > > --- In emax@yahoogroups.com, "rascalrevenge"
><rascalrevenge@>
>>   > > wrote:
>>   > > > > > > >
>>   > > > > > > > Sadly Emax does NOT transmit arpeggiator-data to
>it´s MIDI
>>   > OUT. 
>>   > > > > > > > 
>>   > > > > > > > RR
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > 
>>   > > > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@>
>wrote:
>>   > > > > > > > >
>>   > > > > > > > > Hey guys,
>>   > > > > > > > > 
>>   > > > > > > > > I'm trying to figure out to use the arpeggiator on my
>>   > > Emax-1 to
>>   > > > > > > > > control my Juno 106. Anybody know how to do this? I
>>   was just
>>   > > > > playing
>>   > > > > > > > > with the arpeggiator today, and had it functioning
>>   > wonderfully
>>   > > > > > on the
>>   > > > > > > > > Emax itself, just not sure how to control other
>devices
>>   > > with it.
>>   > > > > > > > > 
>>   > > > > > > > > Thanks!
>>   > > > > > > > > 
>>   > > > > > > > > - Peter
>>   > > > > > > > >
>>   > > > > > > >
>>   > > > > > >
>>   > > > > >
>>   > > > >
>>   > > >
>>   > >
>>   >
>> 
>> 
>> 
>> 
>> 
>> 
>>   Emax and Emax II User's Group Website
>> 
>>   http://www.silveriafamily.com 
>> 
>> 
>> 
>>   SPONSORED LINKS Electronic instrument  Emax  Synthesizer music  
>>         Electronic music  Music sampler  Electronic musical instrument
> 
>> 
>> 
>>
>------------------------------------------------------------------------------
>>   YAHOO! GROUPS LINKS 
>> 
>>     a..  Visit your group "emax" on the web.
>>       
>>     b..  To unsubscribe from this group, send an email to:
>>      emax-unsubscribe@yahoogroups.com
>>       
>>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>Service. 
>> 
>> 
>>
>------------------------------------------------------------------------------
>> 
>> 
>> 
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>
>

>
>Emax and Emax II User's Group Website
>
>http://www.silveriafamily.com 
>Yahoo! Groups Links
>
>
>
> 
>
>
>