also dos 6.22 is not necessary, you can use a more recent dos version as i did, so that even fat 32 partitions can be recognised. http://newdos.de/ davide >-- Original Message -- >To: emax@yahoogroups.com >From: pasquale.aprea@... >Date: Sun, 28 May 2006 23:41:44 +0200 >Subject: RE: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths... >Reply-To: emax@yahoogroups.com > > >i did a SE upgrade myself creating the floppy from dos, just following the >directions you can find on this mailing list homepage. > >http://www.silveriafamily.com/emax/emax_repair.html > >check it out, easy step by step instructions > >davide > >>-- Original Message -- >>To: emax@yahoogroups.com >>From: "peter_vh01" <petervh@...> >>Date: Sun, 28 May 2006 20:09:55 -0000 >>Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths... >>Reply-To: emax@yahoogroups.com >> >> >>Actually, I decided to go ahead, and I installed DOS 6.22 onto an old >>box I had kicking around. >> >>Ran the software, created the disk, but when I run the disk I first >>get the message 'BAD BANKS' and then 'WRONG SOFTWARE'. Anyone else >>ever experience this? I took the SE software off of the Files section >>on this group. >> >>- Peter >> >>--- In emax@yahoogroups.com, "elmacaco" <elmacaco@...> wrote: >>> >>> I can make you an SE upgrade disk, if you like, it's $25 for the >>trouble. >>> >>> The good news then is you can run the Plus OS and have all the Emax >>features. >>> >>> >>> ----- Original Message ----- >>> From: peter_vh01 >>> To: emax@yahoogroups.com >>> Sent: Sunday, May 28, 2006 12:18 PM >>> Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other >>Synths... >>> >>> >>> Ah, no according to this site, >>> http://www.silveriafamily.com/emax/emax_overview.html HD 1.1 came out >>> before the SE. >>> >>> I don't really feel like going through the effort of setting up a DOS >>> machine with a FAT drive to get an SE install disk. Is it truly not >>> possible to send arpeggiated sequences through the midi out with the >>> version I am running? Or perhaps it's just a setting somewhere I need >>> to adjust? >>> >>> - peter >>> >>> --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote: >>> > >>> > OK, >>> > >>> > So how can I find out if my EMAX has the SE revision on it? >>According >>> > to what it says under Master --> Special, my HD has the version >>"Emax >>> > HD Rev. 1.1" installed. Is this the SE version? According to some >>> > websites I was looking at, it should say "Emax SE HD Rev >>1.1"..perhaps >>> > there just wasn't enough space on the display to include the SE? >>> > >>> > - Peter >>> > >>> > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote: >>> > > >>> > > Err, great find then for me and you´re right, just tried it, >>works on >>> > > both my Emax´ with SE and Plus Software, honestly I can´t remind >>> > > reading that this was obviously changed with these >>software-versions, >>> > > "shocking" news ;-), I never tried this with them until A >>MOMENT AGO, >>> > > just because I am sure on Emax 1 Software version 3.2 this did NOT >>> > > work, right ? If anyone can please confirm. In MASTER menu > >>Special > >>> > > MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated >>notes >>> > > running, so on my old non SE- Emax in the same menu you could >>only see >>> > > the note transmitted you pushed if I remember correctly, but >>not the >>> > > arpeggiated notes (inbetween). Let me know someone with OS 3.2 >>if I´m >>> > > right then it´s working only on SE and Plus OS, and thx again >>for that >>> > > info. >>> > > >>> > > RR >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote: >>> > > > >>> > > > err, that's odd then, becuase i'm using my emax as a master >>> > > controller (via atari ST >>> > > > cubase) to record arpeggiated lines to my microkorg & jx3p >>without >>> > > any problem. Cubase >>> > > > records all arpeggiated notes with no problem and plays them >>back. >>> > > Also works if directly >>> > > > connected to external synth.... It does send arpeggiator to >>> midi out. >>> > > > >>> > > > Cheers >>> > > > >>> > > > Simon >>> > > > >>> > > > >>> > > > >>> > > > --- In emax@yahoogroups.com, "rascalrevenge" >><rascalrevenge@> wrote: >>> > > > > >>> > > > > No, if doing so you´d still need to have the arpeggiator >>turned >>> > on and >>> > > > > running into the same problem, the damn arp. just doesn´t >>transmit >>> > > > > arpeggiated notes out, not even internal, whoever made that >>> > decission >>> > > > > @ E-mu back then.... &%$§"!. >>> > > > > >>> > > > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and >>> > transmits >>> > > > > over MIDI, even on an independent MIDI Channel. >>> > > > > >>> > > > > RR >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote: >>> > > > > > >>> > > > > > Hmm, just a thought, might it be possible to record an >>> arpeggiated >>> > > > > > sequence with the sequencer, and play that back through >>the midi >>> > > port? >>> > > > > > >>> > > > > > - Peter >>> > > > > > >>> > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote: >>> > > > > > > >>> > > > > > > Gah! So there is no possible way to use the Emax >>Arpeggiator >>> > > to drive >>> > > > > > > other gear? What a shame! >>> > > > > > > >>> > > > > > > Anybody know of any affordable midi modules out there >>that can >>> > > do a >>> > > > > > > good job of this? >>> > > > > > > >>> > > > > > > - Peter >>> > > > > > > >>> > > > > > > --- In emax@yahoogroups.com, "rascalrevenge" >><rascalrevenge@> >>> > > wrote: >>> > > > > > > > >>> > > > > > > > Sadly Emax does NOT transmit arpeggiator-data to >>it´s MIDI >>> > OUT. >>> > > > > > > > >>> > > > > > > > RR >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> >>wrote: >>> > > > > > > > > >>> > > > > > > > > Hey guys, >>> > > > > > > > > >>> > > > > > > > > I'm trying to figure out to use the arpeggiator on my >>> > > Emax-1 to >>> > > > > > > > > control my Juno 106. Anybody know how to do this? I >>> was just >>> > > > > playing >>> > > > > > > > > with the arpeggiator today, and had it functioning >>> > wonderfully >>> > > > > > on the >>> > > > > > > > > Emax itself, just not sure how to control other >>devices >>> > > with it. >>> > > > > > > > > >>> > > > > > > > > Thanks! >>> > > > > > > > > >>> > > > > > > > > - Peter >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> >>> >>> >>> >>> >>> Emax and Emax II User's Group Website >>> >>> http://www.silveriafamily.com >>> >>> >>> >>> SPONSORED LINKS Electronic instrument Emax Synthesizer music >>> Electronic music Music sampler Electronic musical instrument >> >>> >>> >>> >>------------------------------------------------------------------------------ >>> YAHOO! GROUPS LINKS >>> >>> a.. Visit your group "emax" on the web. >>> >>> b.. To unsubscribe from this group, send an email to: >>> emax-unsubscribe@yahoogroups.com >>> >>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of >>Service. >>> >>> >>> >>------------------------------------------------------------------------------ >>> >>> >>> >>> [Non-text portions of this message have been removed] >>> >> >> >> >> >> >> > >> >>Emax and Emax II User's Group Website >> >>http://www.silveriafamily.com >>Yahoo! Groups Links >> >> >> >> >> >> >> > > > > > >Emax and Emax II User's Group Website > >http://www.silveriafamily.com >Yahoo! Groups Links > > > > > >
Message
RE: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths...
2006-05-28 by pasquale.aprea@...