Emax

In some cases you have to disconnect the ribbon cables inside the machine and clean the contacts.
I've used Isopropyl alcohol to do this, and when reconnected dormant sliders have come back to life.


  ----- Original Message ----- 
  From: Kim Sommer 
  To: emax@yahoogroups.com 
  Sent: Friday, July 21, 2006 5:54 PM
  Subject: Re: [emax] EMAX, Yes and No buttons, functional problem



  Thats the problem i can`t use the data slider to choose Yes and No in recalibration, only the Yes and No buttons.

  ----- Original Message ----- 
  From: Lyn Oakey 
  To: emax@yahoogroups.com 
  Sent: Friday, July 21, 2006 5:46 PM
  Subject: Re: [emax] EMAX, Yes and No buttons, functional problem

  Regarding the yes/no buttons the data slider/pressing enter does the same job.

  Try the bird run - Master module 7

  If still no luck, go into Master 0 Special 4 for recalibration.

  Lyn
  ----- Original Message ----- 
  From: Kim 
  To: emax@yahoogroups.com 
  Sent: Friday, July 21, 2006 4:34 PM
  Subject: [emax] EMAX, Yes and No buttons, functional problem

  Hi All

  I recently brought a EMAX but it seems that the YES and NO buttons and 
  the keyboard dosen`t work.

  Does anyone have an idea what to do ?

  Regards
  Kim

  [Non-text portions of this message have been removed]

  ----------------------------------------------------------

  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21-07-2006

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]