Emax

Drum - to - MIDI triggers are working in that way, that you don´t have a MIDI Note-off, this means, that you have to make longer the release of your samples VCA inside the Emax to hear the full sound.
As I am user of the Emax2 with plenty experience of Drum triggers, I think, it´s just like this.

Try this VCA settings:

A        0
H        0
D        32
S        0
R        22

or if necessary, the release longer.

Hope that helps. Let me know how it works.

Roger
www.fo-co.com



  ----- Original Message ----- 
  From: peter_vh01 
  To: emax@yahoogroups.com 
  Sent: Saturday, September 09, 2006 7:30 AM
  Subject: [emax] Triggering Drum Samples from an Alesis HR-16 on an Emax 1?


  Hey guys,

  I am trying to set up my Emax so that when I press a pad on my Alesis
  HR-16, I hear a drum tone from the Emax. Currently, I am hearing just
  a very short portion of the drum sample. I had the sum trouble with my
  Ensoniq EPS, and was able to remedy this using a special 'percussion'
  envelope setting.

  I assume that a similar solution is available on the Emax 1, but I am
  not too familiar with the unit. Could someone please describe the
  process which I would have to go through to make this happen?

  Thanks!

  - Peter



   

[Non-text portions of this message have been removed]