Emax

???
I assume you performed the unrequired additional license procedure 
(described on page 17 of the manual). That one is not required...
Or did you receive this message during basic registration just after 
you selected the "EMXP/EMXPN" software from the list in OmniFlop ?
In that case, I'll contact Sherlock Consulting...maybe no 
registration is required anymore. Does EMXP support floppies now ?
(if not, you'll get an error in EMXP).

PS: for further support, you can e-mail me.

///E-Synthesist

--- In emax@yahoogroups.com, Tone maro <asrvegas@...> wrote:
>
> for omni flop driver it says to contact you becasue license already 
exists.....
>   cheers
> 
> esynthesist <esynthesist@...> wrote:
>           If you have a WinXP machine you basically have two 
options:
> 
> 1/ Start the PC with a "bootable MS-DOS floppy disk" in your floppy 
> drive. You can create this floppy disk with one of many available 
> freeware on the internet, or by using the boot622.exe or 
boot500.exe 
> programs in the files section. Your PC will boot in DOS mode. 
You'll 
> have to know a litte bit of DOS to go on from that point (like "c:" 
> to go to harddisk, "cd <folder>" to go to the <folder> where EMX 
> resides, "emx" to start emx, ...)
> 
> 2/ You can use EMXP in Windows XP. See files section or links 
> section. Follow the installation instructions described in the 
> included manual to install the Emax-enabled floppy driver BEFORE 
> using EMXPN.
> 
> In both cases: you'll need an internal floppy drive. USB drives 
won't 
> work !!
> 
> ///E-Synthesist 
> 
> --- In emax@yahoogroups.com, Tone maro <asrvegas@> wrote:
> >
> > hmmm
> > im using windows xp and havent booted from DoS the way you 
> describe it. Can i do this and how?
> > 
> > esynthesist <esynthesist@> wrote:
> > Just to be sure: are you running EMX in native DOS ?
> > (not a DOS window in Windows, but a PC booted in DOS)
> > The floppy drive is an internal one ?
> > 
> > ///E-Synthesist
> > 
> > --- In emax@yahoogroups.com, "asrvegas" <asrvegas@> wrote:
> > >
> > > Hi,
> > > Im trying to download the plus os to upgrade the base emaxHD to 
> use 
> > > with scsi. ( i think i can after opening it up)
> > > ive downloaded program here's what happens:
> > > I select the write to disk command (under dos)
> > > it asks for DOS filename which i enter emaxos.emx 
> > > it then reads 'address mark not found hit any key to continue' 
> and 
> > > then it just goes back to main menu.
> > > what am i doing wrong?
> > > i have tried both the (w) command and the (p) command
> > > i have also selected the (a) drive which i think is the floppy 
> > drive.
> > > help im not familiar with DOS.
> > >
> > 
> > 
> > 
> > 
> > 
> > 
> > ---------------------------------
> > Don't pick lemons.
> > See all the new 2007 cars at Yahoo! Autos.
> > 
> > [Non-text portions of this message have been removed]
> >
> 
> 
> 
>          
> 
>  
> ---------------------------------
> Food fight? Enjoy some healthy debate
> in the Yahoo! Answers Food & Drink Q&A.
> 
> [Non-text portions of this message have been removed]
>