Emax

The OS you need to use external SCSI would be Plus OS 1.0. If you do  
not have external scsi and are not adding it, then you could use SE  
HD 1.1

Sounds like the os on the Hard drive is not an SE enabled OS. So take  
your SEHD1.1 OS and copy to the hard disk according to the manual and  
that will fix the hard drive. Just remember that if you boot from any  
other floppy, it will not have the functions on the os- you have to  
re-write the os to any floppy that you want to boot from....

Just my thoughts,
Ted

On Feb 15, 2007, at 8:55 AM, xtr909x wrote:

> Please excuse me for my very bad english, i speak spanish
> thanks!
>
> Hi, yesterday i've updated my emax hd to emax SE with the SE upgrade
> disk (downloaded here in the files sections).
> i follow the instructions and the emax was updated, and the first se
> boot was with the SE disk. After that, i've boot emax with the
> SEHD1.1 OS, wich was stored on the hard disk and then the plus, was
> stored on the hd.
> Now, the problem is: in some functions like sequencer manage or hd
> scan i get an "please insert disk" message , and when i do that, the
> message is "different software rev"
> I've tried all HD OS and i get that messages, and after that, the
> emax need the floppy to load banks and i have to reboot.
> the modules that doesn't work fine by now are sequencer manage,
> sequencer setup, digital effects (se) and scan HD.
>
> any ideas??
>
> (i suspect that the upgrade for the hd model cannot be performed with
> the SE upgrade, but with the seHD upgrade... but i don't really think
> so)
>
>
> 



[Non-text portions of this message have been removed]