Emax

A mac HD does work.

I have one 100MB in my Emax SE. 
But the Emax only format 20MB of it.

/niklas

--- In emax@yahoogroups.com, "J N." <jaedooemax@...> wrote:
>
> Hey Every body
>  
>  I need a drive for my emax se.So i was hoping the drive in the 
classic macintosh would work in the keyboard???any info on this would 
help ALOT.
>  
> THANX
> 
> --- On Wed, 11/19/08, Ted Summers <djtbs1@...> wrote:
> 
> From: Ted Summers <djtbs1@...>
> Subject: [emax] Emax SCSI Upgrade chip kits - 11 available
> To: emax@yahoogroups.com
> Date: Wednesday, November 19, 2008, 1:51 AM
> 
> 
> 
> 
> 
> 
> Installation Tips / Recommendations now available at:
> http://djtbs1. spaces.live. com/default. aspx
> 
> Pictures of the Rev 2 and 3 Emax boards at above link so you know 
what 
> you are looking for to determine whether the upgrade will work in 
your 
> Emax or Baldwin IKE.
> 
> The same rules apply that did before as per the SCSI upgrade docs 
at 
> Emulator Archive- Instructions here:
> http://www.emulator archive.com/ assets/PDF/ Emax%20Plus% 20SCSI%
20Retro% 20Instructions. pdf
> 
> a rev 3 board will take the chips- no board mods.....
> a rev 2 board needs modified
> a rev1 cannot be upgraded.
> I have full Chipsets in stock. The cost of the kit is $50 USD + 
> shipping.
> 
> THIS SET DOES NOT INCLUDE A HARD DISK or the- but can be used with 
> SCSI Zip,
> SCSI Compact Flash / SD, SCSI hard drive, etc. IDE CF works via an
> ACARD SCSI adapter.....
> 
> This set does not include an "external SCSI adapter board", or 
> external connector.
> To provide that would increase the cost of the kit.
> 
> Each set of chips will be tested in my Emax to verify operation 
prior 
> to shipping.
> 
> Kit also includes:
> 28-pin socket for the EPROM and some connect wire for the mods that 
> need to be made.
> HD-capable Emax OS disk (either SE or Non-SE)
> 
> You will need-
> A SCSI drive
> A mounting plate (make one or a 5 1/4 to 3 1/2 in drive bay 
converter 
> kit / rails may work for this purpose also.
> A power splitter - I am not including this as I have different 
reports 
> as to whether this is needed for all emax.
> Soldering skills
> The PDF from Emulator Archive on how to do the modification.
> 
> I need the following information from those ordering:
> Is your emax rev 2 or rev 3 (so I know whether I need to supply the 
> socket)
> Is your emax SE or Non-SE? (So I supply you the right disk).
> 
> Regards,
> Ted Summers
> 
> Paypal accepted: djtbs1@gmail. com
> 
> [Non-text portions of this message have been removed]
> 
>  
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>