Emax

Shayne,

Any modern line level equipment you will buy (including your emax) works 
in a bridged impedence system - where the voltage signal is what's seen 
to be important and there is no attention paid to power transfer.

now, these days there's 2 basic types of "line level" signals - one 
references to something called +4dBu and the other references to -10dBV 
but really, your mixing desk or your audio interface should have enough 
gain control to go  up or down as required.

So, in short, you don't need to match anything. And you don't need a D.I.





smmcc771 wrote:
> Hey everyone...
> 
> I just picked up my first Emax and I'm wondering what the impedance levels are on the 
> stereo outs and the individual 8 channel outs. I've been searching the my owner's manual and 
> the internet and I can't find anything. I'm trying to figure out if I'm going to have to buy a DI 
> (or several) to get the most out of my new Emax SE.
> 
> Thanks!
> Shayne
>