Emax

I'm considering getting a carillon control 25 midi keyboard controller.  should i expect to be able to control the following on the emax with it:

pitch (e.g pitch wheel)
velocity (e.g min/max velocity)
sample truncate
filters, vca etc

???

Cheers




--- In emax@yahoogroups.com, "Julian" <jujulilianan@...> wrote:
>
> 
> the MPC does not work like that.
> the mpc slider set to pitch is for modifying pad samples, not MIDI
> messages.
> 
> all pads can have just one MIDI note assigned to them, and the default
> midi note mapping is pretty out there (not quite sure what they were
> thinking with that, actually..) so if you want to play via mpc only,
> you'll want to spend time making up pad maps (kits) for playing in
> different keys and registers... if you can swing it I'd recommend adding
> a basic MIDI keyboard to your setup - at least for writing.
> 
> 
> 
> On Sun, 03 May 2009 15:10 +0000, "wagwan.drgreenthumb"
> <wagwan.drgreenthumb@...> wrote:
> > Im using an Emax 1 rack, and i have no seperate keyboard controller.  my
> > ideal would be to control everything on the emax from the mpc.  as far as
> > pitch goes, i was hoping i could control the pitch of any sample in the
> > emax, by using the pitch control in the mpc's program screen.  this would
> > be quicker and easier than spanning a sample across many keys.
> > 
> -- 
> http://bleepin.com
> 
> -- 
> http://www.fastmail.fm - The way an email service should be
>