Emax

Sounds like a plan. Thanks.

I assume that any electronic contact cleaner will do if the brand names over here are different?

D.


  ----- Original Message ----- 
  From: jammie 
  To: emax@yahoogroups.com 
  Sent: Friday, November 06, 2009 11:29 AM
  Subject: Re: [emax] Emax II RIP?


    
  get some deoxit and remove all socketed ic 1 at a time deoxing each ic pin then reseating the ic chips this will usually sort every thing out 

  and if it still plays up then you need to overhaul your psu
  ----- Original Message ----- 
  From: Daniel Baum 
  To: emax@yahoogroups.com 
  Sent: Friday, November 06, 2009 9:11 AM
  Subject: [emax] Emax II RIP?

  Hi all,

  My Emax II keyboard seems to have had it.

  When I turn it on, all of the LEDs flash and click. I have not left it on 
  long enough to see what happens next. The actual catalyst for this seems to 
  have been that I moved the keyboard stand slightly so I could get to the 
  plugs at the back.

  I opened it up and nothing appears obviously loose or burnt. I removed the 
  spade connectors connecting the power supply to the wall, and removed a 
  small amount of corrosion. I also removed and reseated the other power 
  supply connectors.

  Just to see what would happen, I disconnected the hard disk.

  None of the above made any difference, so my Emax II is in very large paper 
  weight mode.

  This happened once before, and then stopped on its own. That time it was 
  also immediately after moving it, so it would appear there is something 
  loose.

  Has anyone encountered this and have an idea what it might be?

  Thanks,

  D. 

  ----------------------------------------------------------

  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.424 / Virus Database: 270.14.51/2482 - Release Date: 11/05/09 07:37:00

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]