Emax

Make sure you have the jumpers set properly  on th hd goto manufacturers web site set hd to scsi id 1. I believe you have to set the hd to 1 and the floppy drive to zero on the emax. You must format the drive also before you'll be able to use it. Hope this helps.




________________________________
From: drifter7508 <drifter7508@...>
To: emax@yahoogroups.com
Sent: Mon, November 23, 2009 4:34:52 AM
Subject: [emax] Failed to install Seagate HD in my Emax II

  
Hi all!

I just got this 535MB SCSI Seagate from a friend: 

http://stason. org/TULARC/ pc/hard-drives- hdd/seagate/ ST3610N-535MB- 3-5-SL-SCSI2- FAST.html

After like 10-15 minutes when I try to format it says:
"SCSI software error"

Is this drive not compatible to run in my Emax II?




[Non-text portions of this message have been removed]