Emax

You're quicker than me then;~)

Glad to hear it worked out.

D.



    
  Just installed mine. Sounds much better now. No whining sound
  from the PSU. =) Took 3 minutes to install.

  --- In emax@yahoogroups.com, "drifter7508" <drifter7508@...> wrote:
  >
  > Great pictures Daniel! Piece of cake then.
  > Thx! Gonna install mine now after work.
  > 
  > 
  > 
  > --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
  > >
  > > Yes. it was that simple. 
  > > 
  > > Here are some pics:
  > > 
  > > The old PSU marked up. It would actually have been quite difficult to connect it wrongly but better safe than sorry:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%20in%20Emax.jpg
  > > 
  > > No PSU:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/PSU%20gone.jpg
  > > 
  > > And the new one in. It is very slightly bigger than the old one:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/New%20PSU%20in.jpg
  > > 
  > > Back together:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20together.jpg
  > > 
  > > Back home:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/back%20home.jpg
  > > 
  > > These are some close-ups of the old PSU from which you may or may not be able to see what was wrong with it:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%201.jpg
  > > 
  > > This looks pretty horrible:
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%202.jpg
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%203.jpg
  > > 
  > > http://www.type34.info/temp/My%20equipment/Emax%20PSU/Old%20PSU%204.jpg
  > > 
  > > 
  > > 
  > > Regards to all,
  > > 
  > > D.
  > > 
  > > 
  > > ----- Original Message ----- 
  > > From: drifter7508 
  > > To: emax@yahoogroups.com 
  > > Sent: Friday, November 27, 2009 4:11 PM
  > > Subject: [emax] Re: Emax II RIP? (not!)
  > > 
  > > 
  > > 
  > > Great to hear that all worked out for you Daniel!
  > > Was it just to replace to the PSU straight off?
  > > Just replace and reattach the cables?
  > > 
  > > --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
  > > >
  > > > PS.
  > > > 
  > > > I forgot to add in my previous message: Thanks to whoever it was that (apparently) correctly diagnosed my problem!
  > > > 
  > > > Daniel
  > > > 
  > > > 
  > > > ----- Original Message ----- 
  > > > From: Daniel Baum 
  > > > To: emax@yahoogroups.com 
  > > > Sent: Friday, November 27, 2009 3:21 PM
  > > > Subject: Re: [emax] Re: Emax II RIP? (not!)
  > > > 
  > > > 
  > > > 
  > > > Hi all,
  > > > 
  > > > Mine seems to be fixed! Installing the PSU was literally a 5-minute job, and the Emax II turned on and played when I tested it.
  > > > 
  > > > I may have been imagining it, but it also seemed quieter. Possibly the old PSU was making a noise.
  > > > 
  > > > I'll send pictures later on.
  > > > 
  > > > Highly recommended.
  > > > 
  > > > D.
  > > > 
  > > > Got mine today! Very fast shipping from Miami to Sweden I must say,
  > > > 1 week. =) I will try to install it in my Emax II tonight.
  > > > Hope its just to replace the old PSU without modifications
  > > > to this "new" unit. My old PSU is actually working fine. Its just that
  > > > whining sound that comes when i load from the HD that worries me.
  > > > So if anyone wants to buy my old PSU and fix it up or something you can contact me.
  > > > 
  > > > --- In emax@yahoogroups.com, "Daniel Baum" <daniel@> wrote:
  > > > >
  > > > > Mine arrived yesterday. All I have had time to do was open the box and look at it.
  > > > > 
  > > > > I don't foresee any problems installing it. I will mark all of the plugs to make sure I plug them in the right way.
  > > > > 
  > > > > I probably won't have time to do it until the weekend.
  > > > > 
  > > > > I will post photos etc when I do it.
  > > > > 
  > > > > 
  > > > > Daniel
  > > > > 
  > > > > 
  > > > > 
  > > > > My PSU was shipped today so I will recieve it in a week or two.
  > > > > Please share your install procedure and tell us how it goes
  > > > > there is anything else to do then to "just replace" it with the old one =)
  > > > > 
  > > > > --- In emax@yahoogroups.com, "dbaum0000" <daniel@> wrote:
  > > > > >
  > > > > > 
  > > > > > 
  > > > > > --- In emax@yahoogroups.com, "drifter7508" <drifter7508@> wrote:
  > > > > > >
  > > > > > > 
  > > > > > > I just ordered one yesterday for my Emax II from that company.
  > > > > > > I will let you all know how it goes.
  > > > > > >
  > > > > > 
  > > > > > I also ordered one and I'm supposed to be receiving it today.
  > > > > > 
  > > > > > Hopefully my Emax II should be back up and running quite soon.
  > > > > > 
  > > > > > Is there anything I should know about before installing it? According to the seller it is practically identical to the original and a simple swap.
  > > > > > 
  > > > > > 
  > > > > > Daniel
  > > > > >
  > > > > 
  > > > > 
  > > > > 
  > > > > 
  > > > > 
  > > > > [Non-text portions of this message have been removed]
  > > > >
  > > > 
  > > > [Non-text portions of this message have been removed]
  > > > 
  > > > 
  > > > 
  > > > 
  > > > 
  > > > [Non-text portions of this message have been removed]
  > > >
  > > 
  > > 
  > > 
  > > 
  > > 
  > > [Non-text portions of this message have been removed]
  > >
  >



  

[Non-text portions of this message have been removed]