Emax

Judging by the picture, it looks like the green ground wire on the Emax
power connector isn't going to the black ground wire on the CF reader.

If you have a multimeter, I would check to see if you have +5 volts going to
the black and red wires on the reader.

On Sat, Jan 16, 2010 at 8:30 AM, drifter7508 <drifter7508@...> wrote:

>
>
>
> I set my Card reader to SCSI ID 1.
>
> Is my CF card not compatible?
> See the image below
>
> IMAGE OF MY CARD READER INSTALLED (Yes I have connected
> the ground cable to the greeen on since this photo was taken)
> http://img17.imageshack.us/img17/5822/img0370jm.jpg
>
> Manual for my SCSI CF CARD READER:
> http://www.artmix.com/pdffiles/CF_PM_Manual_102.pdf
>
>  
>


[Non-text portions of this message have been removed]