Emax

But i just said in the post that I have FIXED that
since the picture was taken. Green gos to black.
I have +5v going to the reader, measured with a multimeter.



--- In emax@yahoogroups.com, Dave Sotnick <sotnickd@...> wrote:
>
> Judging by the picture, it looks like the green ground wire on the Emax
> power connector isn't going to the black ground wire on the CF reader.
> 
> If you have a multimeter, I would check to see if you have +5 volts going to
> the black and red wires on the reader.
> 
> On Sat, Jan 16, 2010 at 8:30 AM, drifter7508 <drifter7508@...> wrote:
> 
> >
> >
> >
> > I set my Card reader to SCSI ID 1.
> >
> > Is my CF card not compatible?
> > See the image below
> >
> > IMAGE OF MY CARD READER INSTALLED (Yes I have connected
> > the ground cable to the greeen on since this photo was taken)
> > http://img17.imageshack.us/img17/5822/img0370jm.jpg
> >
> > Manual for my SCSI CF CARD READER:
> > http://www.artmix.com/pdffiles/CF_PM_Manual_102.pdf
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>