No luck with those settings either im afraid. --- In emax@...m, "jammie" <jammie.emma@...> wrote: > > make sure its set to master pins 1 and 2 shorted > > now your cf card supports dma only so you need to jumper pin 7 this is for dma mode > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 3:53 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > There is an image of the IDE CF card reader in my earlier post. > (With all the other links an images) > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > Just tried the settings you recom., sadly... no luck at all =( > > --- In emax@...m, "jammie" <jammie.emma@> wrote: > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 1:28 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > My settings at the moment: > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > Jumper settings manual (I think): > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > -------------------------------------- > > > > CF IDE READER CARD: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > My settings at the moment: > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > ---------------------------------- > > > > Settings for my Panasonic SCSI CD (that would not work either) > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > what make and models did you buy first > > > > > > what jumper settings are you using as this makes a big difference > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > the cf card that you got is fine they work > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > to get it to work so can ted > > > ----- Original Message ----- > > > From: "Brandt R. Gassman" <brandt@> > > > To: <emax@yahoogroups.com> > > > Sent: Saturday, February 06, 2010 11:41 PM > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > kit. > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > information with the group already, but what external SCSI devices > > > > have you tried? > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > with my Emulator III (set to device #5). > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > >> I have tried a bunch of different CF cards. > > > >> Most recently Sandisk 512 Mb oldschool > > > >> Dos fat 16 preform. cards. No luck. > > > >> The Emax wont even find the > > > >> units in the scsi connection. So I cant > > > >> format anything. :-( > > > >> > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > >> > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > >> > complete the "Verifying" process. > > > >> > > > > >> > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > >> > > > > >> > > Isnt that exactly what I recently bought and > > > >> > > failed with? Not the same brand "Acard" > > > >> > > but exactly the same spec. > > > >> > > > > > >> > > I got 2 scsi cases allready. :) > > > >> > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > >> > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > >> get a > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > >> > > swappable > > > >> > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > >> shop > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > >> and > > > >> > > the scsi to ide interface > > > >> > > > ----- Original Message ----- > > > >> > > > From: drifter7508 > > > >> > > > To: emax@yahoogroups.com > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > >> > > kit. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > So, Im fed up with all failures now. > > > >> > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > >> > > > works with EMAX II. > > > >> > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > >> have a > > > >> > > > the CF kit installed in an external scsi case. > > > >> > > > > > > >> > > > Thx. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > ---------------------------------------------------------- > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > No virus found in this incoming message. > > > >> > > > Checked by AVG - www.avg.com > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > >> > > 02/06/10 07:35:00 > > > >> > > > > > > >> > > > > > > >> > > > [Non-text portions of this message have been removed] > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > [Non-text portions of this message have been removed] > > > >> > > > > >> > > > >> > > > >> > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > 07:35:00 > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > [Non-text portions of this message have been removed] >
Message
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508